nv-l
[Top] [All Lists]

Re: Saving a Map

To: nv-l@lists.tivoli.com
Subject: Re: Saving a Map
From: "Brian CL Hwang" <bhwang@tw.ibm.com>
Date: Thu, 8 Nov 2001 14:11:53 +0800

I'm not really sure about this, but I would suspect that your customized
map is already saved. The Save Map As function is generally for making
a new map from the old map. What I am not clear on is why it is grayed out.
That could well be because of the Advanced Options as James says.
As far as I know there is no undo for map customization, so your changes
should be there, for better or worse.

And my advice is, you are better off with only one map anyway.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit




                    James
                    Shanks/Raleigh       To:     IBM NetView Discussion
<nv-l@tkg.com>
                    /IBM@IBMUS           cc:
                    Sent by:             Subject:     Re: [NV-L] Saving a
Map
                    owner-nv-l@tkg
                    .com


                    11/07/01 10:37
                    AM
                    Please respond
                    to IBM NetView
                    Discussion






You are probably using the "limited options" GUI, which is how NetView is
installed on NT by default.
Go to the GUI and pull down "Options"  and click  "Advanced Menu".   Then
you have to close the GUI and restart it, so that you get the full set of
options.
The bummer is that I don't know how to tell you to save your map without
having this already in place, which means that unless someone else knows of
a way, you will have to lose your customized map this time, and re-create
it  when the GUI is restarted.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group




    Geert.Dewinter@toyota-europe.c
    om                                     To:        IBM NetView
    Sent by: owner-nv-l@tkg.com    Discussion <nv-l@tkg.com>
                                           cc:
                                           Subject:        [NV-L] Saving a
    11/07/2001 09:55 AM            Map
    Please respond to IBM NetView
    Discussion







Hello,
I installed NTNetView6.0.2 on W2K and am completely new to it.
Just wanted to know how to save a self-created map (according to help :
File -
Save As - ..)
But when I select File the only options are Close & Exit. Did I missed
something?
Any suggestions?
Thx.
Geert


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l




_________________________________________________________________________


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web