If NETMON is started with a -k parameter then the "RFI" (router fault
isolation) function is turned on. When RFI is turned on, devcies / networks
downstream from an outage will show as white (unreachable). You can turn RFI
off with the -k parm (I forget if it is -k 0 or -k 1).
-----Original Message-----
From: Brian Backer [mailto:brian.backer@electrolux.com]
Sent: Thursday, November 15, 2001 12:12 PM
To: IBM NetView Discussion
Subject: [NV-L] the colors
we're running NV 6.02 on aix 433 and recently we rebuilt our whole TMR. In
the process of doing this we reloaded netview.
Since then when a router goes down, rather than showing up as Red, it's
showing up as White.
I am wondering where I can go to look to correct this..
any suggestions are appreciated.
thanks
brian
***********************************************************************
This e-mail and any attachments may contain information which is
confidential, privileged, proprietary or otherwise protected by law.
The information is solely intended for the named addressee (or a person
responsible for delivering it to the addressee). If you are not the
intended recipient of this message, you are not authorized to read,
print, retain, copy or disseminate this message or any part of it.
If you have received this e-mail in error, please notify the sender
immediately by return e-mail and delete it from your computer.
***********************************************************************
|