Re: Réf. : Re: Réf. : RE: Snmp Configuration

["James Shanks" <jshanks@us.ibm.com>]

This is a multipart message in MIME format.

Please read the man page xnmsnmpconf.  Those are your options.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
 





junior@ssss.gouv.qc.ca
Sent by: owner-nv-l@tkg.com
12/10/2001 11:32 AM
Please respond to IBM NetView Discussion

 
        To:     IBM NetView Discussion <nv-l@tkg.com>
        cc: 
        Subject:        Réf. : Re: Réf. : RE: [NV-L] Snmp Configuration

 





Did you know the command to delete a field???

Pierre Racine




"James Shanks" <jshanks@us.ibm.com> le 10/12/2001 11:23:58

Veuillez répondre à IBM NetView Discussion <nv-l@tkg.com>

Pour :    IBM NetView Discussion <nv-l@tkg.com>
cc :   (ccc : Pierre Jr Racine/Sogique/SSSS)

Objet :   Re:  Réf. : RE: [NV-L] Snmp Configuration



It says right in the header of that file,
        DO NOT EDIT THIS FILE DIRECTLY
and later that you must use SNMP Configuration commands to modify entries
in it.

The reason is that ovsnmp.conf is an output-only file built from the
ovsnmp database.  It is not an input file.
You will have to follow Frank's suggestion or use the GUI.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group






junior@ssss.gouv.qc.ca
Sent by: owner-nv-l@tkg.com
12/10/2001 11:09 AM
Please respond to IBM NetView Discussion


        To:     nv-l@tkg.com
        cc:
        Subject:        Réf. : RE: [NV-L] Snmp Configuration






Thank's

But I forgot some informations. I've modified the file ovsnmp.conf. Now, I
would
the the information that leave in the file be load in the configuration.
What
I've delete in the ovsnmp.conf sould not be in the graphics interface.

Thank's

Pierre Racine




"Frank W. Hansen" <fhansen@enterpriseinnovations.com> le 10/12/2001
10:46:07

Veuillez répondre à IBM NetView Discussion <nv-l@tkg.com>

Pour :    "IBM NetView Discussion" <nv-l@tkg.com>
cc :   (ccc : Pierre Jr Racine/Sogique/SSSS)

Objet :   RE: [NV-L] Snmp Configuration



$NV_BIN/xnmsnmpconf -upd 127.0.0.1:N0c_R0::5:3:5m::N0c_Rw

This sample works for the loopback.  Change the IP address and community
strings and you should be good to go.

Best Regards,

Frank W. Hansen
Tivoli Certified Enterprise Consultant



-----Original Message-----
From: owner-nv-l@tkg.com [mailto:owner-nv-l@tkg.com]On Behalf Of
junior@ssss.gouv.qc.ca
Sent: Monday, December 10, 2001 9:21 AM
To: nv-l@tkg.com
Subject: [NV-L] Snmp Configuration




Hi

Is there anybody know how to modifiy the informations in the file
"ovsnmp.conf".
I don't want modifiy by the graphic interface because  they have to much
informations in this file. I need to modify by another way.

     1- Is it possible??

     2- How can do that

Thank's

Pierre Racine
Quebec City


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l








#### att1.htm has been removed from this note on December 10 2001 by James 
Shanks


Please read the man page xnmsnmpconf.  Those are your options.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group

junior@ssss.gouv.qc.ca Sent by: owner-nv-l@tkg.com 12/10/2001 11:32 AM Please respond to IBM NetView Discussion

To:        IBM NetView Discussion <nv-l@tkg.com>         cc:                 Subject:        Réf. : Re: Réf. : RE: [NV-L] Snmp Configuration

Did you know the command to delete a field???

Pierre Racine




"James Shanks" <jshanks@us.ibm.com> le 10/12/2001 11:23:58

Veuillez répondre à IBM NetView Discussion <nv-l@tkg.com>

Pour :    IBM NetView Discussion <nv-l@tkg.com>
cc :   (ccc : Pierre Jr Racine/Sogique/SSSS)

Objet :   Re:  Réf. : RE: [NV-L] Snmp Configuration



It says right in the header of that file,
        DO NOT EDIT THIS FILE DIRECTLY
and later that you must use SNMP Configuration commands to modify entries
in it.

The reason is that ovsnmp.conf is an output-only file built from the
ovsnmp database.  It is not an input file.
You will have to follow Frank's suggestion or use the GUI.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group






junior@ssss.gouv.qc.ca
Sent by: owner-nv-l@tkg.com
12/10/2001 11:09 AM
Please respond to IBM NetView Discussion


        To:     nv-l@tkg.com
        cc:
        Subject:        Réf. : RE: [NV-L] Snmp Configuration






Thank's

But I forgot some informations. I've modified the file ovsnmp.conf. Now, I
would
the the information that leave in the file be load in the configuration.
What
I've delete in the ovsnmp.conf sould not be in the graphics interface.

Thank's

Pierre Racine




"Frank W. Hansen" <fhansen@enterpriseinnovations.com> le 10/12/2001
10:46:07

Veuillez répondre à IBM NetView Discussion <nv-l@tkg.com>

Pour :    "IBM NetView Discussion" <nv-l@tkg.com>
cc :   (ccc : Pierre Jr Racine/Sogique/SSSS)

Objet :   RE: [NV-L] Snmp Configuration



$NV_BIN/xnmsnmpconf -upd 127.0.0.1:N0c_R0::5:3:5m::N0c_Rw

This sample works for the loopback.  Change the IP address and community
strings and you should be good to go.

Best Regards,

Frank W. Hansen
Tivoli Certified Enterprise Consultant



-----Original Message-----
From: owner-nv-l@tkg.com [mailto:owner-nv-l@tkg.com]On Behalf Of
junior@ssss.gouv.qc.ca
Sent: Monday, December 10, 2001 9:21 AM
To: nv-l@tkg.com
Subject: [NV-L] Snmp Configuration




Hi

Is there anybody know how to modifiy the informations in the file
"ovsnmp.conf".
I don't want modifiy by the graphic interface because  they have to much
informations in this file. I need to modify by another way.

     1- Is it possible??

     2- How can do that

Thank's

Pierre Racine
Quebec City


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l








#### att1.htm has been removed from this note on December 10 2001 by James Shanks