Larry,
perhaps you can check the owner and/or access rights of the map db. Have a
look to /usr/OV/databases/openviewmapdb the account you are using to access
NetView must have RW access to the map.
If it has not, then use the Netview command 'ovwchown' to make it owner, or use
the 'ovwperms' command to reflect your needs.
The commands described above are for version 6, but I beleive they still exist
in version 7.
Hope this helps,
Bernard Baudoux
Phone: +32 (0)2/565.24.68
e-mail : bernard.baudoux@fortisbank.com
> -----Original Message-----
> From: Super-User [SMTP:root@harem.ericsson.se]
> Sent: Thursday, 20 December, 2001 14:30
> To: nv-l@tkg.com
> Subject: [NV-L] Netview 7.1 & read-write
>
> Hi!
> After have installed Netview 7.1, we can't get read-write
> access to the map anymore, thanks for any advice !!
>
> larry
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
This email and any attached files are confidential and may be legally
privileged.
If you are not the intended recipient, any disclosure, reproduction,
copying, distribution, or other dissemination or use of this communication
is strictly prohibited.
If you have received this transmission in error please notify the sender
immediately and then delete this email.
Email transmission cannot be guaranteed to be secure or error free as
information could be intercepted, corrupted, lost, destroyed, arrive late or
incomplete, or contain viruses.
The sender therefore is in no way liable for any errors or omissions in the
content of this message, which may arise as a result of email transmission.
If verification is required, please request a hard copy.
|