Re: How to use paging?

["James Shanks" <jshanks@us.ibm.com>]

This is a multipart message in MIME format.

There is no point in testing with your own commands, unless that is what 
you want to put in your script and call from an action node in a ruleset. 
NetView has its own paging facility, but before you try this with a 
ruleset, you will need to get it working from the command line.

The NetView command is nvpage.  There is a man page on it.  Before you can 
use it successfully, you will have to configure the nv.carriers file and 
the nvpager.conf file in /usr/OV/conf.  And nvpager.config will have you 
specify a modem file to describe your modem.  The setup is described in 
the NetView Administrator's Guide. If you think you have done all this 
correctly and still cannot get it to work, take a look at the 
nvpagerd.alog and nvpagerd.errlog in /usr/OV/log. 

If you like, you can also re-register nvpagerd so that he will trace 
everything he does.To do this 
(1) edit /usr/OV/lrf/nvpagerd.lrf and change the line which reads
        OVs_YES_START:nvsecd::OVs_WELL_BEHAVED:60:
      to
        OVs_YES_START:nvsecd:-d:OVs_WELL_BEHAVED:60:
(2) ovdelobj /usr/OV/lrf/nvpagerd.lrf    ( this de-registers the current 
daemon)
(3) ovaddobj /usr/OV/lrf/nvpagerd.lrf   (this adds the new definition)

You can reverse the process at any time when you don't want to trace any 
more. 

Support can help you with any of this if you want personalized assistance.
 

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
 





mgaouar@ssss.gouv.qc.ca
Sent by: owner-nv-l@tkg.com
12/28/2001 09:18 AM
Please respond to IBM NetView Discussion

 
        To:     IBM NetView Discussion <nv-l@tkg.com>
        cc: 
        Subject:        [NV-L] How to use paging?

 



Hi everybody,

I'm trying to use paging ( pagenet ) with Unix and Netview by using a
ruleset.The modem works fine and I succeded to page with AT commands.But 
I'm
unable with NETVIEW.Could you help me and give me what should be normal to
verify and to do to be sure that I missed something ?I'm not an expert and 
I
have just read the administration book.

Thank's a lot


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l



There is no point in testing with your own commands, unless that is what you want to put in your script and call from an action node in a ruleset.  NetView has its own paging facility, but before you try this with a ruleset, you will need to get it working from the command line.

The NetView command is nvpage.  There is a man page on it.  Before you can use it successfully, you will have to configure the nv.carriers file and the nvpager.conf file in /usr/OV/conf.  And nvpager.config will have you specify a modem file to describe your modem.  The setup is described in the NetView Administrator's Guide. If you think you have done all this correctly and still cannot get it to work, take a look at the  nvpagerd.alog and nvpagerd.errlog in /usr/OV/log.  

If you like, you can also re-register nvpagerd so that he will trace everything he does.To do this 
(1) edit /usr/OV/lrf/nvpagerd.lrf and change the line which reads
        OVs_YES_START:nvsecd::OVs_WELL_BEHAVED:60:
      to
        OVs_YES_START:nvsecd:-d:OVs_WELL_BEHAVED:60:
(2) ovdelobj /usr/OV/lrf/nvpagerd.lrf    ( this de-registers the current daemon)
(3) ovaddobj /usr/OV/lrf/nvpagerd.lrf   (this adds the new definition)

You can reverse the process at any time when you don't want to trace any more.        

Support can help you with any of this if you want personalized assistance.
        

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group

mgaouar@ssss.gouv.qc.ca Sent by: owner-nv-l@tkg.com 12/28/2001 09:18 AM Please respond to IBM NetView Discussion

To:        IBM NetView Discussion <nv-l@tkg.com>         cc:                 Subject:        [NV-L] How to use paging?

Hi everybody,

I'm trying to use paging ( pagenet ) with Unix and Netview by using a
ruleset.The modem works fine and I succeded to page with AT commands.But I'm
unable with NETVIEW.Could you help me and give me what should be normal to
verify and to do to be sure that I missed something ?I'm not an expert and I
have just read the administration book.

Thank's a lot


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l