This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
Also, make sure with the paging node, that you have used NVSEC_ADMIN to set
up an association between the user ID in the ruleset and the pager number in
nv.carriers.
-----Original Message-----
From: James Shanks [mailto:jshanks@us.ibm.com]
Sent: Friday, December 28, 2001 8:53 AM
To: IBM NetView Discussion
Subject: Re: [NV-L] How to use paging?
There is no point in testing with your own commands, unless that is what you
want to put in your script and call from an action node in a ruleset.
NetView has its own paging facility, but before you try this with a ruleset,
you will need to get it working from the command line.
The NetView command is nvpage. There is a man page on it. Before you can
use it successfully, you will have to configure the nv.carriers file and the
nvpager.conf file in /usr/OV/conf. And nvpager.config will have you specify
a modem file to describe your modem. The setup is described in the NetView
Administrator's Guide. If you think you have done all this correctly and
still cannot get it to work, take a look at the nvpagerd.alog and
nvpagerd.errlog in /usr/OV/log.
If you like, you can also re-register nvpagerd so that he will trace
everything he does.To do this
(1) edit /usr/OV/lrf/nvpagerd.lrf and change the line which reads
OVs_YES_START:nvsecd::OVs_WELL_BEHAVED:60:
to
OVs_YES_START:nvsecd:-d:OVs_WELL_BEHAVED:60:
(2) ovdelobj /usr/OV/lrf/nvpagerd.lrf ( this de-registers the current
daemon)
(3) ovaddobj /usr/OV/lrf/nvpagerd.lrf (this adds the new definition)
You can reverse the process at any time when you don't want to trace any
more.
Support can help you with any of this if you want personalized assistance.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
mgaouar@ssss.gouv.qc.ca
Sent by: owner-nv-l@tkg.com
12/28/2001 09:18 AM
Please respond to IBM NetView Discussion
To: IBM NetView Discussion <nv-l@tkg.com>
cc:
Subject: [NV-L] How to use paging?
Hi everybody,
I'm trying to use paging ( pagenet ) with Unix and Netview by using a
ruleset.The modem works fine and I succeded to page with AT commands.But I'm
unable with NETVIEW.Could you help me and give me what should be normal to
verify and to do to be sure that I missed something ?I'm not an expert and I
have just read the administration book.
Thank's a lot
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
Also,
make sure with the paging node, that you have used NVSEC_ADMIN to set up an
association between the user ID in the ruleset and the pager number in
nv.carriers.
There is no
point in testing with your own commands, unless that is what you want to put
in your script and call from an action node in a ruleset. NetView has
its own paging facility, but before you try this with a ruleset, you will need
to get it working from the command line.
The NetView command is nvpage. There is a man page on it.
Before you can use it successfully, you will have to configure the
nv.carriers file and the nvpager.conf file in /usr/OV/conf. And
nvpager.config will have you specify a modem file to describe your modem.
The setup is described in the NetView Administrator's Guide. If you
think you have done all this correctly and still cannot get it to work, take a
look at the nvpagerd.alog and nvpagerd.errlog in /usr/OV/log.
If you like, you can also
re-register nvpagerd so that he will trace everything he does.To do this
(1) edit /usr/OV/lrf/nvpagerd.lrf and
change the line which reads
OVs_YES_START:nvsecd::OVs_WELL_BEHAVED:60:
to
OVs_YES_START:nvsecd:-d:OVs_WELL_BEHAVED:60:
(2) ovdelobj /usr/OV/lrf/nvpagerd.lrf ( this de-registers
the current daemon)
(3) ovaddobj
/usr/OV/lrf/nvpagerd.lrf (this adds the new definition)
You can reverse the process at any time
when you don't want to trace any more.
Support can help you with any of this if
you want personalized assistance.
James Shanks
Level 3 Support
for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software
Group
|
| mgaouar@ssss.gouv.qc.ca
Sent by: owner-nv-l@tkg.com
12/28/2001 09:18 AM
Please respond to IBM NetView Discussion
|
To:
IBM NetView Discussion <nv-l@tkg.com>
cc:
Subject: [NV-L] How to
use paging?
|
Hi everybody,
I'm trying to use paging ( pagenet ) with
Unix and Netview by using a
ruleset.The modem works fine and I succeded to
page with AT commands.But I'm
unable with NETVIEW.Could you help me and
give me what should be normal to
verify and to do to be sure that I missed
something ?I'm not an expert and I
have just read the administration
book.
Thank's a
lot
_________________________________________________________________________
NV-L
List information and Archives:
http://www.tkg.com/nv-l
|