RE: [nv-l] Trap from 0.0.0.0

["Davis, Donald" <donald.davis@firstcitizens.com>]

Colin,
Do you have any devices with virtual management interfaces?
I have Cisco Content Switches (ArrowPoint) that send with 0.0.0.0 if the management interface is not configured.
Are you using the loopback address on your Cisco routers for the trap source address?
Did you miss configuring one of them?

Don Davis

-----Original Message-----
From: colin.quadros@citicorp.com [mailto:colin.quadros@citicorp.com]
Sent: Monday, September 09, 2002 12:53 AM
To: nv-l@lists.tivoli.com
Subject: [nv-l] Trap from 0.0.0.0
Importance: High

I am getting a trap with the source address as 0.0.0.0

"Node 0.0.0.0 is ReInitialized Due to power-on at 09/08/02_07:18:29 AM".

All my routers are having proper IP addresses configured.
What could be causing this kind of a trap.

Regards
Colin.

---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)

------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are intended solely for the use of individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the sender by return mail.

==============================================================================