Side question:
Can anyone provide insight to why Netview allows only one RW map?
Thanks,
Jason Allison
Principal Engineer
ARINC Incorporated
Office: (410) 266-2006
FAX: (410) 573-3026
-----Original Message-----
From: James Shanks [mailto:jshanks@us.ibm.com]
Sent: Tuesday, November 19, 2002 9:26 AM
To: nv-l@lists.tivoli.com
Subject: RE: [nv-l] Changing label of node
You guys may be conversing privately about this, but here's a public
answer to Jeff's question.
Updates can only be made to the read-write map and there is only one of
those. That is basic NetView design and cannot be changed. read-write
maps only get status changes (read that as color changes -- status
updates appear as new color on existing symbols ) automatically. Any
other altered content of the submaps on a read-only map -- new symbols,
new or changed labels, new smartsets, new smartset members -- are only
available by refresh. That is what refresh does -- get all the non-status
updates -- the "real" changes that were done since it was last opened --
to the read-only map. And because refresh is disruptive to the operator
with the read-ony map (the whole thing goes away) it has to be done from
the r-o GUI itself. So you need to schedule your changes and your
refreshes if you have an r-o map open all the time. Like it or not, and
you probably don't, that's the way it works.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
jeff.ctr.vandenbussche@faa.gov
11/18/2002 02:55 PM
To: "Allison, Jason (JALLISON)" <JALLISON@arinc.com>
cc: nv-l@lists.tivoli.com
Subject: RE: [nv-l] Changing label of node
Jason,
I guess I would want 2 rw maps open at the same time. Or else, if I do
have 2 users with the same map open at the same time, how do I ensure that
both users will be viewing the same status/label for all objects. Using
the OvwSetSymbolLabel call, only the user with the rw map open will have
the correct label, the user with the read-only map open will display the
incorrect (old) symbol label. Is there any way to keep these in sync,
other than manually refreshing the map?
Thanks,
Jeff
"Allison, Jason
(JALLISON)" To: Jeff CTR
Vandenbussche/ACT/CNTR/FAA@FAA
<JALLISON@arinc.c cc:
om> Subject: RE: [nv-l]
Changing label of node
11/18/02 02:03 PM
1) Is there a way to update the label on a read only map? The code I
have
so far only seems to be updating the read-write map. Only if I refresh
the
read-only map, does the label change take effect.
-- Correct. I do not know of a way to otherwise 'Sync' the maps. Not
sure
which Netview version you are using, but in 7.1.x, there is only 1 RW map,
though many 'web' interfaces. Not sure how this can help, but it is
something I am looking forward to working with when we get our 7.1.3
in-house.
2) It also only seems to work if the GUI is started by the admin user. Do
I need to change the permissions on the map or user, or something similar?
-- Not sure. I took a quick look at our permissions and they are also:
-rw-rw-rw-
Are you asking if there can be more than 1 rw map? Or is your concern
getting the 'generic' ability to write to the map?
In the past, I have only be able to have 1 user update the OVw DB. If you
want to force a user to have a Read-Only map, you can do that on the
command
like call to Netview. Otherwise, this may be a good question for the
list,
but as I remember, only 1 RW map all others cant update DB.
Best of luck,
Jason
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|