I used to believe, in earlier versions, that it would delete interface
cards for
interfaces that were no longer configured. I first noticed it no longer did
this
in 7.1.1. I thought maybe I only imagined that it ever worked that way. It
appears that it is now necessary to manually delete those interfaces. I
would suspect that it might be a side-effect of all the code changes
required
to support of RFI. Have you noticed whether they fall under the 'node down
delete interval'? I have not checked. I just make it a policy to manually
delete them when the Change Control notification (smile) tells me that
an interface has been deconfigured.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
"Barr, Scott"
<Scott_Barr@csgsy To:
<nv-l@lists.tivoli.com>
stems.com> cc:
Subject: RE: [nv-l] Deleted
Networks
11/27/2002 01:52
PM
I have observed this phenomena using v7.1.3 under Solaris 2.8. The device
in question is a Cisco 6509 switch and the subnets were VLANs that were
removed. Demand poll seemed to have no effect on these "unreachable"
subnets. I have been suspicious of it but had not come to any conclusion. I
think there is something there, just can't put my finger on it.
> -----Original Message-----
> From: Mike Walsh [mailto:Mike.Walsh@us.ing.com]
> Sent: Wednesday, November 27, 2002 12:16 PM
> To: nv-l@lists.tivoli.com
> Subject: [nv-l] Deleted Networks
>
>
> Greetings to you all,
>
> I have encountered an interesting phenominum with 7.1.3
> running on a sun
> machine with the Magnum Switch Coordinator. I am hoping
> someone could steer
> me straight on this.
>
> We have a Checkpoint device at a remote site which had a
> x.x.x.x network
> on it that had been deleted several weeks ago. I noticed
> that OLD network
> was still being displayed ( I had set it to unmanaged while
> confirming that
> it had actually been deleted) I ran a demand poll on the checkpoint
> device and saw that this network was still defined. After
> double checking,
> I confirmed that it no longer existed and proceeded to delete
> the network
> from all NV displays. After running another demand poll I
> saw that it had
> disappeared from the poll results.
>
> My question is - am I misinterpreting the function of a
> demand poll? I
> always thought it to actually check devices for interfaces and their
> status) or do we have a problem with 7.1.3?
>
> Any guidance on this is very greatly appreciated.
>
> Mike
>
>
> Mike Walsh
> ****Please Note - New EMAIL Address mike.walsh@us.ing.com*********
> 612-342-3118
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> For additional commands, e-mail: nv-l-help@lists.tivoli.com
>
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need immediate
> assistance from Tivoli please call the IBM Tivoli Software Group
> help line at 1-800-TIVOLI8(848-6548)
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|