nv-l
[Top] [All Lists]

RE: [nv-l] Netview rulesets

To: "Qureshi, Fawad" <Fawad.Qureshi@ssa.gov>, "Kulikowski, Richard" <rkulikow@wm.com>, "'nv-l@lists.tivoli.com'" <nv-l@lists.tivoli.com>
Subject: RE: [nv-l] Netview rulesets
From: "Colson, Donna" <Donna.Colson@ssa.gov>
Date: Mon, 3 Feb 2003 09:12:01 -0500
Delivered-to: mailing list nv-l@lists.tivoli.com
Delivery-date: Mon, 03 Feb 2003 14:40:56 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
List-help: <mailto:nv-l-help@lists.tivoli.com>
List-post: <mailto:nv-l@lists.tivoli.com>
List-subscribe: <mailto:nv-l-subscribe@lists.tivoli.com>
List-unsubscribe: <mailto:nv-l-unsubscribe@lists.tivoli.com>
Mailing-list: contact nv-l-help@lists.tivoli.com; run by ezmlm
Hi Richard,
Also in the Ruleset Editor you have the ability to do a "RESET on MATCH".
This is where you can get a NODE DOWN event and then set a 10:00 timer.  If
a NODE UP event comes in with the 10:00 minutes then the event will get
dropped and should not get forwarded to TEC.

The could be a solution for you.

-----Original Message-----
From: Qureshi, Fawad [mailto:Fawad.Qureshi@ssa.gov] 
Sent: Friday, January 31, 2003 1:36 PM
To: Kulikowski, Richard; 'nv-l@lists.tivoli.com'
Subject: RE: [nv-l] Netview rulesets

Richard, we do this through a shell script. When a node down trap is
received, a nodedown script is invoked via nodedown ruleset that retries
ping five times with a delay of 1 minute each, just to make sure it is not
just a reboot, before it forwards it to TEC.

Fawad Qureshi

-----Original Message-----
From: Kulikowski, Richard [mailto:rkulikow@wm.com] 
Sent: Friday, January 31, 2003 12:55 PM
To: 'nv-l@lists.tivoli.com'
Subject: [nv-l] Netview rulesets


I am new to netview.  I have a rule that queries Smartsets first,  traps
second (up-down node or interface), and  then forwards event to TEC.  My
problem is with a node that bounces once or twice, being forwarded to TEC. I
would like to put in a filter that holds the event for 10 minutes before
forwarding.   I am not sure how to do this.  Do I use thresholds, Set State,
or something else. I do not know what the attributes numbers (1-50) mean, or
how to use them.  Can someone help? 

Richard Kulikowski CCNP - CCDP
Senior Telecommunications Specialist
Waste Management
www.wm.com
(713) 265-1518 *




---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group help line
at 1-800-TIVOLI8(848-6548)

---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)

---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)


<Prev in Thread] Current Thread [Next in Thread>
  • RE: [nv-l] Netview rulesets, Colson, Donna <=

Archive operated by Skills 1st Ltd

See also: The NetView Web