Transferred the map? You mean you transferred all of
/usr/OV.databases/openview, didn't you?
And the daemons were down when you did that, correct? And then you
restarted them and ran reset_ci and then mapadmin -u.
Logged into NetView as root or just UNIX?
The error you are getting indicates a security failure, either that nvsecd
is not running (if so, then you should ovstop all the daemons and start
them with /etc/netnmrc) or that nvsecd is running and NetView security is
turned on, but root has not done an nvauth. So do an ovstatus and see.
If this doesn't help, then perhaps you had better explain in detail what
steps you followed because Support does this all the time, and I do mean
almost daily. It's how you debug a customer's database. Did one system
have security on and the other not? Can you run nvsec_admin?
James Shanks
Level 3 Support for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
"CATALINA MARTINEZ" <CATALINA.MARTINEZ@tlc.state.tx.us>
02/05/2003 04:03 PM
To: <hendrik.zahn@de.ibm.com>, <nv-l@lists.tivoli.com>
cc:
Subject: Re: [nv-l] transferring topology maps
I transferred the map but now I am not able to run ovtopofix..
I get the following error
NVS_isclientAuthized(): permission denied for "ovtopofix"
A IBM Tivolit Netview login is required to permit the the requested
operation.
authized=0 status=36
I am logged in as root. I brought down the map, logout of the os. Logged
in again as root, brought up the gui as root and I still can not run
ovtopofix. This happed after I transferred the maps. I did an mapadmin -u
and the reset_ci
Any ideas...
>>> "Hendrik Zahn" <hendrik.zahn@de.ibm.com> 01/31/03 07:06AM >>>
Additional to James answer:
Don't forget to execute reset_ci after transfer.
MfG./ Best regards
Hendrik Zahn (L2 EMEA Tivoli NetView Support)
James Shanks/Raleigh/IBM@IBMUS on 31.01.2003 13:31:00
To: nv-l@lists.tivoli.com
cc:
Subject: Re: [nv-l] transferring topology maps
Both systems are fully installed and running? Then there is no reason why
you cannot transfer the databases AND trapd.conf between them. The only
deal with trapd.conf is whether you are forwarding to TEC. If not, then
there is not issue. If you are, then the systems must be configured
alike,
with similar tecint.conf files using the same default event class.
We transfer databases and trapd.conf from one machine to another for
problem determination all the time.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
"CATALINA MARTINEZ"
<CATALINA.MARTINEZ@tlc.s To:
<nv-l@lists.tivoli.com>
tate.tx.us> cc:
Subject: [nv-l]
tranferring topology maps
01/29/03 10:03 AM
I have a back up Netview server running "upgrade" 7.1.2 AIX 433 ML 10 and
would like to transfer the topology map to the production server running
"fresh install" 7.1.2 AIX 433 ML 10. They are both in the same subnet.
Is there a problem with one being an upgrade and the other a fresh
install?
or can I just transfer the /usr/OV/databases/openview and it will be ok.
I was told before that I could not transfer the trapd.conf because of the
structure class or something. I dont know if t he same applies with
topology map.
thanks
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|