If there is a premade remedy script you should take that route.
Best of luck,
Jason Allison
Principal Engineer
ARINC Incorporated
Office: (410) 266-2006
FAX: (410) 573-3026
-----Original Message-----
From: James Shanks [mailto:jshanks@us.ibm.com]
Sent: Wednesday, March 05, 2003 1:47 PM
To: nv-l@lists.tivoli.com
Subject: RE: [nv-l] How to capture output of NV Event to a flat file --
for Remedy
I think you are going the long way around the barn. As I recall, there
is an executable you use to send an event to Remedy.
You call it from a script, run as an automatic action as specified in
trapd.conf. You set that up with xnmtrap.
In the command for automatic action you specify the full path to your
script and variables that you need to populate the Remedy ticket.
Enclose the variables which conatin more than one word in quotes
/usr/OV/bin/my_Remedy_script $E $G $S "$3" $6 whatever
Inside your script you access the variables positionally, that is
$E becomes $1, $G becomes $2, $S is $3, $6 is now $4, and so on.
This is really common practice. Perhaps some other Remedy user will give
you a script .
James Shanks
Level 3 Support for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
"DiIulio, Daniel" <Daniel.DiIulio@DigitalNet.com>
03/05/2003 01:12 PM
To: "nv-l" <nv-l@lists.tivoli.com>
cc:
Subject: RE: [nv-l] How to capture output of NV Event to a
flat file
Hi Alison,
Thanks for the follow-up. I need to capture the event in file format so
that I can populate a Remedy ARS ticket with the contents. I'm not
looking to write to a log per say, but would like to be able to some how
capture the event's contents. Do you know of a known method to populate
Remedy with NV Events??
Thanks,
Dan
-----Original Message-----
From: Allison, Jason (JALLISON)
[mailto:JALLISON@arinc.com]
Sent: Wed 3/5/2003 12:33 PM
To: 'nv-l'
Cc:
Subject: RE: [nv-l] How to capture output of NV Event to
a flat file
What is your goal? If your goal is to have better
logging of events, there
are other ways.
Jason Allison
Principal Engineer
ARINC Incorporated
Office: (410) 266-2006
FAX: (410) 573-3026
-----Original Message-----
From: DiIulio, Daniel
[mailto:Daniel.DiIulio@DigitalNet.com]
Sent: Wednesday, March 05, 2003 11:29 AM
To: nv-l@lists.tivoli.com
Subject: [nv-l] How to capture output of NV Event to a
flat file
Hello All,
I'm trying to capture the contents of an NV Event to a
flat file. Is there
a known method for doing that?
Thanks,
Dan
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail:
nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need
immediate
assistance from Tivoli please call the IBM Tivoli
Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|