Hi,
if the operstatus doesn't change netview cannot handle the isdn backup
functions proper. What i
have heard was that there are 100 way's to do ISDN Backup configuration.
And only some of them
are supported. I think the dormand status changes only if you configure
your cisco ISDN interfaces
as Backup to the main interface. I know that most of the customers where i
have been this was not
the case, and therefore not working..
dietmar
To: nv-l@lists.tivoli.com
cc:
Subject: [nv-l] ISDN backup
Hi all,
my environement is
aix 4.3.3
Netview 7.1.3 with fixpack 1
Cisco routers network
I tried to manage ISDN backup interfaces following manuals instructions,
putting an entry in seed file like +172.28.*.*. What happens is that
netview shows these interfaces in the correct state of user1 when they are
not active but when a backup inetrface goes up netview is not able to
understand it. So no dialer up event arrives and the interface state
remains user1. I tested cisco routers with different IOS release (11.2,
12.1, 12.2) obtaining the same behaviour.
The strange thing is that using MIB Browser I noticed that when the isdn
interface is not active the value of mib ifoperstatus is "dormant" like I
expect but when it is active ifoperstatus remains dormant, and not up.
Any suggestion?
thanks
Fabio Zuffranieri
IBM Global Services-ITS
Via C.G. Viola-Rome 00148-ITALY
tel:335-1433063
email:zuffranieri@it.ibm.com
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|