Thanks Bill;
I'll keep that in mind when drafting failover situations.
So am I right in thinking the MLM can act as a "gateway" to
firewalled environments? We have several different networks
to deploy and some will only be accessible through a series of firewalls.
We were able to limit the rules and port restrictions with Tivoli
Framework.
Trying to figure out where the NetView docs are that address this
situation.
Thanks again !
Scot Needy
Yahoo.id scot11us
AIM.id scot11us
ICQ.id 179544536
-----Original Message-----
From: Stringfellow, William
[mailto:William.Stringfellow@bankofamerica.com]
Sent: Tuesday, July 01, 2003 1:37 PM
To: Scot; nv-l@lists.tivoli.com
Subject: RE: [nv-l] DR For NetView ?
Hi Scott,
We have been running this for several years. We just have 2 NetViews, 1
east coast and 1 west coast, with one being the primary and the other being
a backup. They each have an MLM in front of them and all of the network
devices are pointed at both MLMs for trap targets. The network devices also
have both Netviews on their access lists.
Whenever we have a problem with the primary, or there is maintenance to
be
done, the operators are all told to shift their monitoring to the backup
server. Used to be hectic when we were still on X sessions. With the
web-client it is hardly noticable.
The database is copied from the primary to the backup once a day, so the
most data you would lose would be 24 hours. Just need to do a reset_ci
after restoring the database onto the backup so that it knows it's real id.
You mentioned Geo load balancing....this does not do that, both NetViews
monitor the entire network, so it is purely disaster recovery.
Bill Stringfellow
Consultant - EDS
Network Management Support
Bank of America
CA4-704-02-03
2000 Clayton Road, Building D
Concord, CA 94520
Office: 925.692.7283
Fax: 925.675.1763
Email: william.stringfellow@eds.com
Pager: 877.647.8086
ePage: 8776478086@skytel.com
-----Original Message-----
From: Scot [mailto:scotrn@cox.net]
Sent: Tuesday, July 01, 2003 8:03 AM
To: nv-l@lists.tivoli.com
Subject: [nv-l] DR For NetView ?
Hi;
We are in the planning stages of launching a
second datacenter site for geo load balancing and
disaster recovery. When looking at the NetView docs
it seems like I can use an MLM like a Tivoli gateway
in production mode but I'm not sure how one would do a
backup NetView Server. Does anyone have any pointers ?
Is there a deployment guide for NetView that would cover this?
I have been searching the IBM website with no luck
and I don's see the docs on CD.
Thanks!
Scot
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|