Maybe usefull to you to have a look in Backup Manager configuration.
Tivoli Netview Unix Administrator´s Guide, Chapter 6, Item Configuring a Backup
Manager.
I hope this help,
--
Helder Garcia
Systems Engineer
VANguard
http://www.vanguard-it.com.br
-----Mensagem original-----
De: Alan E. Hennis [mailto:Hennis_Alan_E@cat.com]
Enviada: ter 1/7/2003 16:34
Para: nv-l@lists.tivoli.com
Cc:
Assunto: RE: [nv-l] DR For NetView ?
Scott
You mentioned using MLM. I am using NetView 7.3 on RedHat 7.2. There
are no
MLMs for the RedHat version.
Is anyone doing this sort of thing with NetView and not using MLMs. I
have
2 NetView boxes on primary and one will be a secondary. I just need to
figure out how to get the secondary box to work. I will be using
x-windows
to access the boxes.
Any IBMers. Is this sort of config covered in the NetView Admin training
class?
Thanks
Alan E. Hennis
Caterpillar Inc.
Systems+Process Division
309.494.3308
hennis_alan_e@cat.com
"Stringfellow, William"
<William.Stringfellow@bankofa
merica.com>
07/01/2003 12:36 PM To: Scot
<scotrn@cox.net>
nv-l@lists.tivoli.com
cc:
Subject: RE:
[nv-l] DR For NetView ?
Caterpillar: Confidential Green Retain Until: 07/31/2003
Retention Category:
G90 -
General
Matters/Administration
Hi Scott,
We have been running this for several years. We just have
2
NetViews, 1 east coast and 1 west coast, with one being the primary and
the
other being a backup. They each have an MLM in front of them and all of
the network devices are pointed at both MLMs for trap targets. The
network
devices also have both Netviews on their access lists.
Whenever we have a problem with the primary, or there is
maintenance to be done, the operators are all told to shift their
monitoring to the backup server. Used to be hectic when we were still
on X
sessions. With the web-client it is hardly noticable.
The database is copied from the primary to the backup once
a
day, so the most data you would lose would be 24 hours. Just need to
do a
reset_ci after restoring the database onto the backup so that it knows
it's
real id.
You mentioned Geo load balancing....this does not do that,
both NetViews monitor the entire network, so it is purely disaster
recovery.
Bill Stringfellow
Consultant - EDS
Network Management Support
Bank of America
CA4-704-02-03
2000 Clayton Road, Building D
Concord, CA 94520
Office: 925.692.7283
Fax: 925.675.1763
Email: william.stringfellow@eds.com
Pager: 877.647.8086
ePage: 8776478086@skytel.com
-----Original Message-----
From: Scot [mailto:scotrn@cox.net]
Sent: Tuesday, July 01, 2003 8:03 AM
To: nv-l@lists.tivoli.com
Subject: [nv-l] DR For NetView ?
Hi;
We are in the planning stages of launching a
second datacenter site for geo load balancing and
disaster recovery. When looking at the NetView docs
it seems like I can use an MLM like a Tivoli gateway
in production mode but I'm not sure how one would do a
backup NetView Server. Does anyone have any pointers ?
Is there a deployment guide for NetView that would cover this?
I have been searching the IBM website with no luck
and I don's see the docs on CD.
Thanks!
Scot
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|