Karl, 
You cannot cut/paste a Location. 
  It must be deleted and recreated. 
A Location cannot be 
  deleted unless it is empty. 
  I suggest you do the following: 
1. 
  Open SubTree_2_1 and turn OFF automatic layout 
2. Open 
  Bank_A in SubTree_1_1 and cut (from this submap) all of it's contents 
  (Networks & Routers) and paste them into SubTree_2_1
     They should all go into the new New Object 
  Holding Area. 
3. Delete Location Bank_A from 
  SubTree_1_1 
4. Add a new Bank_A under 
  SubTree_2_1 
5. copy/paste the objects from the New 
  Object Holding Area into the new Bank_A 
  ======================= 
Don 
  Davis 
First Citizens Bank 
Raleigh, NC.  27603-3526 
  
  
  -----Original Message----- 
From: 
  Karl-Heinz.Gerriets@GAD.de [mailto:Karl-Heinz.Gerriets@GAD.de] 
  
Sent: Monday, December 01, 2003 5:33 AM 
To: nv-l@lists.us.ibm.com 
Subject: [nv-l] Move 
  (cut/paste) Locations in IP-Internet 
  Hello list .. 
  NV-Version 7.1.3 / running on SUN 
we 
  use: 
      - one map 
  (default) 
      - 
  location.conf to place networks / routers in Bank-Folders 
      - seed-File (limited) discovery 
  
      - Netview-dconsole (Write-Map) 
  to handle Map-Administration 
  Scheme: 
                         
  root 
                          
  || 
            
  #---------IP-Internet---------# 
            
  |                             
  | 
         
  SubTree_1                     
  SubTree_2 
            
  |                             
  | 
         
  SubTree_1_1                   
  SubTree_2_1 
            
  |                             
  | 
>>>>>     
  Bank_A                        
  Bank_B 
            
  |                             
  | 
      Network's / 
  Router's          Network's / 
  Router's 
  Question: 
      - How can I move the hole 
  Bank-Folder(Bank_A) from SubTree_1_1 to 
SubTree_2_1  without deletion the content of Bank_A and rediscover 
  ? 
      - If I try cut 
  Bank_A, following messages occurs: 1 Symbol could not 
be deleted; use hide to remove .. 
  Search in nv-list was not succesfully .. any suggestions 
  ? 
  Karl-Heinz Gerriets 
Produktion / 
  Überwachungswerkzeuge und Automation 
octohelp 
  OL1096117 
eMail:  
  Karl-Heinz.Gerriets@GAD.de 
http://www.gad.de 
  ------------------------------------------------------------------------------
This 
  electronic mail and any files transmitted with it are confidential and are 
  intended solely for the use of individual or entity to whom they are 
  addressed. If you are not the intended recipient or the person responsible for 
  delivering the electronic mail to the intended recipient, be advised that you 
  have received this electronic mail in error and that any use, dissemination, 
  forwarding, printing, or copying of this electronic mail is strictly 
  prohibited. If you have received this electronic mail in error, please 
  immediately notify the sender by return 
  mail.
==============================================================================