I just tried manage/unmanage and it failed without a R/W
map up even though netviewd is running. See below:
root
[s00cXXX/usr/scripts]# nvmaputil.sh --manage-node
sxa-lisbon-px-xxa51
There is no
read/write map opened whose map name is "default".
root
[s00cXXX/usr/scripts]# ps -ef |grep netviewd
root 17288 27618 2 15:07:23 pts/0
0:00 grep netviewd
root 23616 34202 0 18:06:20
- 1:57
/usr/OV/bin/netviewd
-----Original Message-----
From:
owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of
Bursik, Scott {PBSG}
Sent: Thursday, February 05, 2004 2:49
PM
To: 'nv-l@lists.us.ibm.com'
Subject: RE: [nv-l] nvmaputil / Web Device
Mgmt
I have not found this to be the case. I just opened a RO
map and have
netviewd running and nvmaputil works fine. There is no
RW map open by a
user. I was able to unmamage a node and verify it with a
ovobjprint -s and
then manage it again.
Scott Bursik
Enterprise Systems Management
PepsiCo Business Solutions Group
(972) 963-1400
scott.bursik@pbsg.com
-----Original Message-----
From: Francois Le Hir [mailto:flehir@ca.ibm.com]
Sent: Thursday, February 05, 2004 1:24
PM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] nvmaputil / Web Device
Mgmt
Fawad,
1- I have noticed the same. If a RO map is opened,
nvmaputil will always
fail, even if netviewd is also running with a RW map. It
looks like
nvmaputil will use the ovw (the opened map) instead of
netviewd whenever
ovw is running. And of course the update will not happen
if the map used by
nvmaputil is in RO mode.
2- I believe the web device management is when you
define an URL for the
management of a device (see the W option in
oid_to_type)
Salutations, / Regards,
Francois Le Hir
Network Projects & Consulting
Services
IBM Global Services
Phone: (514) 205 6695
"Qureshi,
Fawad"
<Fawad.Qureshi@ss
a.gov>
To
Sent by:
"'nv-l@lists.us.ibm.com'"
owner-nv-l@lists.
<nv-l@lists.us.ibm.com>
us.ibm.com
cc
Subject
02/05/2004
01:56 [nv-l] nvmaputil /
Web Device Mgmt
PM
Please respond
to
nv-l
NV 7.1.3 / AIX 5.1
Couple of questions:
1. Nvmaputil.sh will fail if map is not up
in R/W mode, even with
netviewd running. I was
told it would work if netviewd was running. I
have tried netviewd in
both ro and rw mode.
2. I posted this before but got no
response. Does anyone know what Web
Device Mgmt option under
Tools is for? I find no doc on this feature.
Issue is this: We have
several devices that can be configured via web
browser; it's basically a
SNMP SET operation. I have all the MIBs
loaded and can do
individual SETs on individual devices via the MIB
Browser. I was hoping
there was a way to invoke an app from Netview
(web console) that can
display this type of devices and do collective
SETs on
them.
Thanks.
Cheers
Fawad Qureshi