okay, ... I have fixed it!
found on IBM:
<<
Problem Error messages during installation found in the /tmp/update.log is:
* Running customize script for fileset OVWIN.
NOTE: Linking security support for nvsecd daemon.
NOTE: Configuring ovwdb
NOTE: Configuring nvsecd
NOTE: Starting nvsecd
ovstart: unable to contact ovspmd: No such file or directory
awk: 0602-533 Cannot find or open file 19982.
The input line number is 0. The file is 19982. The source line number is 1.
ERROR: Unable to start nvsecd with ovstart.
ERROR: Unable to start nvsecd with ovstart.
ERR_0003_040
ERR_0003_040
+ dspmsg -s 5 nv6000.cat 9999 customize: Failing customize with exit code
%s\n 2
+ 1>> /tmp/update.log
customize: Failing customize with exit code 2
ERROR: Customize script for fileset OVWIN exited with code 2. ERR_cfgbf_001
nvconfigbf: Failing doing configuration with exit code 2
base: Failure running script or command '/usr/OV/install/tools/nvconfigbf'
ERR_bcfg_210
base: Failing base.config with exit code 2 Cause ovstart has timed out
waiting for ovspmd to initialize. ovspmd is busy closing file descriptors
based on the ulimit specification for "nofiles". The usual case is that the
"unlimited" specification has been chosen, or some other extremely high
value. Solution If the ulimit specification for nofiles is set to or
defaulting to "unlimited", -1 (minus 1), or greater than 32767, change it
to 32767.
>>
and Web:
<<
http://www.landfield.com/wu-ftpd/mail-archive/wuftpd-questions/2003/Jan/0071.html
>>
thanks for help
Tilo Strauch
------------------------------------------------------------------------
Netzwerkmanagement
------------------------------------------------------------------------
Deutsche Rentenversicherung
Rechenzentrum Leipzig e.V.
Tel.: +49 0341 9170-220
Fax: +49 0341 9110-806
------------------------------------------------------------------------
mailto:tilo.strauch@rzleipzig.de
|