Paul, Thanks for that. I successfully ran the final PKT "after" script and all looks good - webserver is up. If anything so much as burps I'll probably uninstall and reinstall. Already capped the default data collection and autotrace, too. I knew 7 years of Framework and Courier/SWD experience would help me someday. Just never thought it would be with upgrading Netview in a non-TME environment. :-) Thanks again, -Jim
-----owner-nv-l@lists.us.ibm.com wrote: -----
To: nv-l@lists.us.ibm.com
From: Paul <pstroud@bellsouth.net>
Sent by: owner-nv-l@lists.us.ibm.com
Date: 03-01-2004 5:21 PM
Subject: Re: [nv-l] 7.1.3 FP01 -> 7.1.4 upgrade failed - PROBLEM FOUND, NOT RESOLVED
Jim,
Dont worry about salvaging it. Go ahead and uninstall it,
then reinstall it. All the data in the backup directory
is still there and will be migrated again. So you wont
lose anything by uninstalling.
Paul
Jim.Federline@metriscompanies.com wrote:
> Good idea - I've got lots of space, tho. Thanks Paul, I hadn't checked
> that yet.
>
> But I found the problem - WINZIP!
>
> I untarred the CDROM tarfile from Passport Advantage with Winzip with
> Smart CR/LF translation enabled (the default). With this particular
> file, FILE19.PKT, it will mistakenly translate characters, rendering the
> file corrupted. Below, "FILE19.PKT" is the good file untarred by Winzip
> with smart CR/LF turned off, the other is the original. They have
> different sizes:
>
> -rw-r----- 1 25583 system 189808956 Mar 01 13:27 FILE19.PKT
> -rw-r----- 1 25583 system 191578978 Mar 01 12:32
> FILE19.PKT.winzip_default.untar
> If you test the original file with sapack "preview" mode, it gives the
> same error I got during the upgrade:
>
> $ ../patch/7.1.4-NVS-CDROM/instbund/bin/aix5-r1/sapack -upP
> ./FILE19.PKT.winzip_default.untar
> messages:
> unpack: input error (err=54, blkno=2)
> FATAL.
>
> (If there is interest, I can post an sapack manpage, with warnings and
> disclaimers...)
>
> The new FILE19.PKT, untarred with Winzip without smart CR/LF enabled,
> works fine with sapack. I have now placed the files in usr/OV that it
> would have under normal conditions.
>
> SO! I have an answer to my Question#1.
>
> As for Question#2: I captured the after script from the next
> FilePackage block, FILE20.PKT. So, given that I can unpack FILE19.PKT
> and place the resulting files in /usr/OV, I should be able to execute
> the commands in the after script from FILE20.PKT.
>
> Question#2 now becomes: Is there anything else that instalnv or
> children do beyond the effects of wserverc and it's children? If not, I
> can salvage this upgrade. If so, I'm not so sure.
>
> Also looking for help with Question#3...
>
> Thanks,
> -Jim
>
> --
> James B. Federline
> Metris Companies, Inc.
> 10900 Wayzata Blvd.
> Minnetonka, MN 55305
> E-Mail: jim.federline@metriscompanies.com
> <mailto:jim.federline@metriscompanies.com>
> Direct: 952.358.4043
> Main: 952.525.5020
> Fax: 952.417.5686
> Mobile: 763.286.5381
>
> -----owner-nv-l@lists.us.ibm.com wrote: -----
>
> To: nv-l@lists.us.ibm.com
> From: Paul <pstroud@bellsouth.net>
> Sent by: owner-nv-l@lists.us.ibm.com
> Date: 03-01-2004 1:10 PM
> Subject: Re: [nv-l] 7.1.3 FP01 -> 7.1.4 upgrade failed
>
> I would check your disk space those particular files(especially www.tar)
> are very large.
>
> Paul
>
>
> Jim.Federline@metriscompanies.com wrote:
>
> > We're testing this upgrade currently. We're on AIX 5.1. We use
> "sudo",
> > so I did a "sudo ./instalnv -k SERVER -u" from the CDROM directory.
> > The CDROM was obtained from Passport Advantage online via download. I
> > copied the untarred CDROM to the server from a Windows NT machine
> with
> > Putty scp (pscp). I had to remove control-M's from all text files on
> > the server, since they got transferred in binary with scp from the
> > Windows NT machine.
> >
> > Also, a /usr/OV.back.v7r1 directory was created with serversetup
> prior
> > to attempting the upgrade. Also, a tarball of the entire /usr/OV
> > directory was made to disk.
> >
> > Now - the failure:
> > ----------------------------------------------
> > $ export LANG=en_US
> > $ sudo ./instalnv -k SERVER -u
> > Password:
> > Installing IBM Tivoli NetView SERVER 7.1.4 on azdesm01.
> > .
> > Unless you cancel, the following operations will be executed:
> > need to copy the machine independent Message Catalogs to:
> > azdesm01:/usr/local/Tivoli/msg_cat
> > need to copy the machine independent Portable Files to:
> > azdesm01:/usr/local/Tivoli/bin
> > need to copy the machine independent Portable Files
> Configuration to:
> > azdesm01:/usr/local/Tivoli/bin
> > need to copy the architecture specific NetView Prerequisites to:
> > azdesm01:/usr/local/Tivoli/bin/aix5-r1
> > need to copy the architecture specific Binaries to:
> > azdesm01:/usr/local/Tivoli/bin/aix5-r1
> > need to copy the architecture specific NetView Base
> Configuration to:
> > azdesm01:/usr/local/Tivoli/bin/aix5-r1
> > need to copy the architecture specific NetView Features to:
> > azdesm01:/usr/local/Tivoli/bin/aix5-r1
> > need to copy the architecture specific NetView Features
> > Configuration to:
> > azdesm01:/usr/local/Tivoli/bin/aix5-r1
> > Continue(y/n)? y
> > Executing queued operation(s)
> > Distributing machine independent Message Catalogs for azdesm01
> > ... completed.
> > Distributing architecture specific NetView Prerequisites for azdesm01
> > ............................................ completed.
> > Distributing architecture specific Binaries for azdesm01
> >
> .....................................................................................................................................................................................................
> > completed.
> > Distributing architecture specific NetView Base Configuration for
> azdesm01
> > .............. completed.
> > Distributing architecture specific NetView Features for azdesm01
> >
> ...........................................................................................................................................
> > completed.
> > Distributing architecture specific NetView Features Configuration for
> > azdesm01
> >
> ...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
> > completed.
> > Distributing machine independent Portable Files for azdesm01
> > ...
> > unpack: input error (err=54, blkno=2)
> > FATAL.
> > Unable to check for on_error script, configuration not yet valid.
> > completed (with errors).
> > Install finished.
> > ---------------------------------------------
> >
> > NVSERVUP.IND tell me that "Portable Files" is FILE19.PKT, a 190MB
> > binary file. The associated FILE19.CFG file indicates this step
> has no
> > scripts, just files to unpack, shown below... none of these files
> > unpacked:
> >
> > ---------------------------------------------
> > #version=NVS_714_TAR_generic
> > do_compress=y
> > do_checksum=y
> > stop_on_error=n
> > create_dirs=y
> > keep_paths=y
> > file_cksums=y
> > unix_default_dir_uid=0
> > unix_default_file_uid=0
> > unix_default_dir_gid=0
> > unix_default_file_gid=0
> > post_notice=n
> > append_log=n
> > #
> > # File List:
> > #
> > %
> > usr
> > usr/OV
> > usr/OV/jars
> > usr/OV/jars/nvjars.tar
> > usr/OV/online_help
> > usr/OV/online_help/C
> > usr/OV/online_help/C/online_help.tar
> > usr/OV/www
> > usr/OV/www.tar
> > usr/OV/www/wwwroot
> > usr/OV/www/wwwroot/download
> > usr/OV/www/wwwroot/download/nvwc.tar
> > usr/OV/www/wwwroot/download/nvwc_aix_jre_1_3.tar
> > usr/OV/www/wwwroot/download/nvwc_linux_jre_1_3.tar
> > usr/OV/www/wwwroot/download/nvwc_solaris_jre_1_3.tar
> > usr/OV/www/wwwroot/download/nvwc_thin.tar
> > usr/OV/www/wwwroot/download/nvwc_thin.zip
> > usr/OV/www/wwwroot/download/nvwcinstall.exe
> > %
> > --------------------------------------------------
> >
> > The "Portable Files" step is second to completion - the last step is
> > "Portable Files Configuration", FILE20.PKT/FILE20.CFG, which has an
> > "after" script.
> >
> > Here's the relevant section in /tmp/tivoli.sinstall:
> > -------------------------------------------------
> > Before Command real ms=44/1177476, cpu ms=0/360000
> > executing following command #18 on azdesm01:
> > PATH="/bin:/usr/bin:/usr/ucb:$PATH";export PATH;umask 022;echo
> >BEG_OF_STREAM;ThisDir=/usr/local/Tivoli/bin;ThisHost=azdesm01;ThisPkg=TAR;default=/usr/local/Tivoli
> > /bin;cd
> >
> /usr/local/Tivoli/bin;/usr/OV/archive/patch/7.1.4-NVS-CDROM/instbund/bin/aix5-r1/sapack
> > -u /usr/OV/archive/patch/7.1.4-NVS-CDROM/FILE19.PKT;sleep 2; echo;
> > echo END_OF_STREAM
> > stdout read 14 bytes.
> > XE[.]
> > Xstderr read 121 bytes.
> > E[.]
> > XE[.]
> > stdout read 15 bytes.
> > 0 byte read of stdout
> > 0 byte read of stderr
> > waiting for child...
> > ...finished waiting.
> > stderr: messages:
> > unpack: input error (err=54, blkno=2)
> > FATAL.
> > Unable to check for on_error script, configuration not yet valid.
> > Command on host azdesm01 finished. real ms=3024/1180500, cpu
> ms=0/360000
> > [
> > unpack: input error (err=54, blkno=2)
> > FATAL.
> > Unable to check for on_error script, configuration not yet valid.
> > ]
> > [ completed (with errors).
> > ]
> > ------------------------------------------
> >
> >
> > I saved off the contents of /tmp and /usr/OV/log.
> >
> >
> > QUESTIONS:
> >
> > 1. What went wrong? Do you think the scp copy affected
> FILE19.PKT? It
> > is just a sapack'ed file of tarfiles, maybe some DOS carriage returns
> > are present? I will have to do some sapack tests in the meantime...
> > 2. Can this upgrade be salvaged? How? It seems that the core Netview
> > server has been upgraded sucessfully, given success of all prior
> > FilePackage blocks in the NVSERVUP.IND.
> > 3. What are my options? What's the best option to get to 7.1.4
> from here?
> >
> > Thanks a million,
> > -Jim
> > --
> > James B. Federline
> > Metris Companies, Inc.
> > 10900 Wayzata Blvd.
> > Minnetonka, MN 55305
> > E-Mail: jim.federline@metriscompanies.com
> > <mailto:jim.federline@metriscompanies.com>
> > Direct: 952.358.4043
> > Main: 952.525.5020
> > Fax: 952.417.5686
> > Mobile: 763.286.5381
>
>
|