RH 7.2, NV 7.1.3 + FixPack 2
Hello all,
I'm polling a handful of MIBs on different boxes with custom built polling
daemons. I've custom built topology icons under some nodes to represent
these MIBs and use the polling daemons to control the status of the icons.
I have a myriad of problems with my snmp polling daemons - so here goes:
1.) All works as it should for about 15 minutes after ovstop/ovstart.
2.) After about 15 minutes, calls to nvotChangeVertexStatus( ) in the
polling daemon still return a NVOT_SUCCESS return code but the color of the
icon on the map associated with the nvotChangeVertexStatus( ) call no
longer changes.
3.) Once this happens, I've performed ovstop/ovstart on that particular
polling daemon which then hangs in the nvotInit( ) call - it just never
returns.
4.) I then close the NetView GUI and restart it. It is then
"synchronizing" forever.
5.) I then have trouble closing the GUI and often get a core file -->
/usr/OV/PD/cores/ovspmd/core
5.) I can only get things to work again by killing the GUI and performing
ovstop/ovstart.
I've debugged the polling daemon and it looks like the parameters I'm
passing to the NetView calls are always OK. What else could the problem
be?
Jason Alburger
609-485-7225
CPDLC Engineer
Joseph Sheairs Associates, Inc.
FAA/AOS-330
|