It should be fixed according to the paperwork but I can't confirm that because
we are still running NV 6.1.3 with RFI disabled! NV 7 is not available on our
OS which is Digital TRU64 UNIX.
Robin
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On
Behalf Of Maxime TRANNOY
Sent: Friday 01 October 2004 11:03
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] RFI Question
Yes the problem could be similar but i use netview 7.1.3 FP2 so it should
be also fixed.
Cordialement.
Maxime TRANNOY
IGS - Network Delivery Support Center
Tel : +33 (0) 492 114 767
mailto:mtrannoy@fr.ibm.com
JAMES Robin
<robin.james@euro
control.int> To
Sent by: "'nv-l@lists.us.ibm.com'"
owner-nv-l@lists. <nv-l@lists.us.ibm.com>
us.ibm.com cc
Subject
30-09-2004 16:08 RE: [nv-l] RFI Question
Please respond to
nv-l
We had a situation where we were getting symbols set to white on our LAN
incorrectly and it was caused by a bug when there is a simple network
without a router. We had to switch off RFI. The problem was fixed in NV
7.1.2 under IY23153.
Robin
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On
Behalf Of Maxime TRANNOY
Sent: Thursday 30 September 2004 15:50
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] RFI Question
Thanks francois for your answer.
What you told me is the way I understand RFI works.
But in my Pb I haven't found any node Down or interface down before the
network Unreachable and node and interface Unreachable arrived and that's
why i don't understand.
Is there any situtation were this can happen?
Cordialement.
Maxime TRANNOY
IGS - Network Delivery Support Center
Tel : +33 (0) 492 114 767
mailto:mtrannoy@fr.ibm.com
Francois Le Hir
<flehir@ca.ibm.co
m> To
Sent by: nv-l@lists.us.ibm.com
owner-nv-l@lists. cc
us.ibm.com
Subject
Re: [nv-l] RFI Question
30-09-2004 15:17
Please respond to
nv-l
Maxime,
There should be always one node or interface down first before RFI generate
the unreachable events. This first event is necessary for RFI to start
looking for an unreachable subnet. However once the subnets are unreachable
there won't be any more events generated for nodes on that subnet. The way
it works is that as long as none of the router interfaces on that subnet
respond, there will be no polling and no update for any other object in
that subnet. Only the router interfaces are polled.
So when a subnet goes unreachable, you should have one interface or node
down event and then the "subnet unreachable" event and nothing more.
Salutations, / Regards,
Francois Le Hir
Network Projects & Consulting Services
IBM Global Services
Phone: (514) 964 2145
Maxime TRANNOY
<MTRANNOY@fr.ibm.
com> To
Sent by: nv-l@lists.us.ibm.com
owner-nv-l@lists. cc
us.ibm.com
Subject
[nv-l] RFI Question
09/30/2004 06:05
AM
Please respond to
nv-l
Hello
AIX 51.
nv 7.1.3 FP2
I have a question about RFI
I have received unreachable traps from network node and interface in my
trapd.log file but I haven't received any node down or interface down which
has created all this unreachable node.
How is it possible to have unreachable node without a node down or
interface down before.
thanks.
____
This message and any files transmitted with it are legally privileged and
intended for the sole use of the individual(s) or entity to whom they are
addressed. If you are not the intended recipient, please notify the sender
by reply and delete the message and any attachments from your system. Any
unauthorised use or disclosure of the content of this message is strictly
prohibited and may be unlawful.
Nothing in this e-mail message amounts to a contractual or legal commitment
on the part of EUROCONTROL unless it is confirmed by appropriately signed
hard copy.
Any views expressed in this message are those of the sender.
____
This message and any files transmitted with it are legally privileged and
intended for the sole use of the individual(s) or entity to whom they are
addressed. If you are not the intended recipient, please notify the sender by
reply and delete the message and any attachments from your system. Any
unauthorised use or disclosure of the content of this message is strictly
prohibited and may be unlawful.
Nothing in this e-mail message amounts to a contractual or legal commitment on
the part of EUROCONTROL unless it is confirmed by appropriately signed hard
copy.
Any views expressed in this message are those of the sender.
|