Hi All,
I am having some problems discovering severs in our network as well as some
HSRP-ed networks. I have discovered all the routers and switches, we use
manual discovery (an entry in the netmon.seed file) and we use only SNMP for
polling.
I have added servers IP addresses in the seed file, in the usual way.
Connectivity is OK, SNMP agents are running, communities are fine (we have
been using two, so bith of them are there, just in case). But they do not
appear on the map. It is probably a beginners mistake, but I can not see it.
On the other hand, we have two L3 switches (correctly recognized as routers,
I have fixed that) which do have HSRP interface between them. They are both
OK, but the networks with HSRP are not discovered. The other on the same
switch are. I can see all the relevant interfaces on them as well. Above
mentioned servers are DNS servers, and they reside on one of the HSRP-ed
nets.
I have tried demand polling, deleting, rediscovering many times.
If you have any suggestions, I would be more than gratefull. Otherwise,
another PMR is on the way...
Have a nice day,
Vladan Milosevic
Senior Engineer
IP Network and Services
Information Technology Division
063 MOBTEL Srbija
tel. +381 63 79 08 106
fax +381 11 30 13 452
GSM +381 63 230 973
e-mail: vladan.milosevic@mobtel.co.yu
|