Hi..
Try specifying $A in the variable list so it will be something like this
(notice the $A at the end of Trap: line):
EDESC
critb {1.3.6.1.4.1.688.5.1} 6 1 u 4 4 "Status Events"
Trap: generic $G specific $S args ($#): $* $A
EXEC /home/u/automation/brprt $1 $2 $3 $A $S $G
SDESC
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]On
Behalf Of Pretorius, Vynita
Sent: Tuesday, May 10, 2005 5:31 AM
To: nv-l@lists.us.ibm.com
Subject: FW: [nv-l] Automatic actions - how to reference the source
address / hostname with example
James,
Thanks for your comments however I cannot get it to pass me the source
ip /hostname with the $A or %G, $S
(below comes out of trapd.conf)
EDESC
critb {1.3.6.1.4.1.688.5.1} 6 1 u 4 4 "Status Events"
Trap: generic $G specific $S args ($#): $*
EXEC /home/u/automation/brprt $1 $2 $3 $A $S $G
SDESC
Below is the /home/u/automation/brprt
# cd /home/u/automation
# cat brprt
st1=$1
st2=$2
st3=$3
ipadd=$4
spec=$5
gen=$6
echo $st1 " var1 " > /home/u/automation/brout.out1
echo $st2 " var2 " >> /home/u/automation/brout.out1
echo $st3 "var3 " >> /home/u/automation/brout.out1
echo $ipadd " ip address" >> /home/u/automation/brout.out1
echo $spec " specific " >> /home/u/automation/brout.out1
echo $gen " generic" >> /home/u/automation/brout.out1
# more /home/u/automation/brout.out1
Brprt var1
test var2
only var3
FMT ip address
ERROR: specific
accessing generic
#
(below is in trapd.log)
1115716933 3 Tue May 10 11:22:13 2005 VYNITA u Trap: generic 6
specific 1 args (1): [1] private.enterprises.688.5.1 (OctetString):
Brprt test only
Thanks
Vynita Pretorius
+27 82 856 0321
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of James Shanks
Sent: Monday, May 09, 2005 7:40 PM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Automatic actions - how to reference the source
address / hostname
We are talking about passed parameters here, and it is difficult to
answer
a question like this without a specific example.
But for example, if you had a script called "mytest" and you wanted to
pass
it varbind 1, varbind 2, the enterprise oid, and the agent address, in
that order, you would do so like this:
<full_path>mytest $1 $2 $e $A
but inside your script these parameters would be referenced in order as
$1, $2, $3, and $4. They are not exported as ruleset variables are.
Whether you use the agent address ($A) or the NetView attribute $2,
which
always contains the hostname, depends upon whether you are dealing with
a
NetView trapd on a non-NetView trap. Only NetView traps have the
hostname
in the second varbind.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
"Pretorius,
Vynita"
<VPretorius@fnb.c
To
o.za> <nv-l@lists.us.ibm.com>
Sent by:
cc
owner-nv-l@lists.
us.ibm.com
Subject
[nv-l] Automatic actions - how to
reference the source address /
05/09/2005 11:32 hostname
AM
Please respond to
nv-l
Hi all
Running 7.1.4 fp3 on solaris 2.8
I can only get Automatic actions to pass me what is in the string via $1
$2
$3, if I reference $e I get nothing?
I need the ip address or hostname of the source of the event how do I
reference it?
Any ideas
Thanks
Vynita Pretorius
+27 82 856 0321
___________________________________________
The views expressed in this email are, unless otherwise stated, those of
the author and not those
of the FirstRand Banking Group an Authorised Financial Service Provider
or
its management.
The information in this e-mail is confidential and is intended solely
for
the addressee.
Access to this e-mail by anyone else is unauthorised.
If you are not the intended recipient, any disclosure, copying,
distribution or any action taken or
omitted in reliance on this, is prohibited and may be unlawful.
Whilst all reasonable steps are taken to ensure the accuracy and
integrity
of information and data
transmitted electronically and to preserve the confidentiality thereof,
no
liability or
responsibility whatsoever is accepted if information or data is, for
whatever reason, corrupted
or does not reach its intended destination.
__________________________________
____________________________________________________________________________
_______________________
The views expressed in this email are, unless otherwise stated, those of the
author and not those
of the FirstRand Banking Group an Authorised Financial Service Provider or
its management.
The information in this e-mail is confidential and is intended solely for
the addressee.
Access to this e-mail by anyone else is unauthorised.
If you are not the intended recipient, any disclosure, copying, distribution
or any action taken or
omitted in reliance on this, is prohibited and may be unlawful.
Whilst all reasonable steps are taken to ensure the accuracy and integrity
of information and data
transmitted electronically and to preserve the confidentiality thereof, no
liability or
responsibility whatsoever is accepted if information or data is, for
whatever reason, corrupted
or does not reach its intended destination.
________________________________
<<attachment: winmail.dat>>
|