|
It
sounds familiar. Open the device and note the contents. If it's
a "Layer 2 Status" icon which is causing the marginal condition it's an
ITSA related problem a number of us on the *nix side have encountered.
Search the archive for my handling of it. Essentially you acknowledge the
device, open the device icon and acknowledge the L2Status icon to restore the
device state.
Bill Evans
-----Original Message-----
From:
owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of
Leslie Clark
Sent: Monday, July 11, 2005 11:50 PM
To:
nv-l@lists.us.ibm.com
Subject: RE: [nv-l] Node Status does not
change
My guess would be that it is caused by Switch Analyzer. I cannot tell
you how to fix it however. I believe that the Switch Analyzer folks would say
it is working as designed. You will probably need the help of Support to
figure out what it is trying to tell you about the status of your switches.
Cordially,
Leslie A.
Clark
IBM Global Services - Systems Mgmt & Networking
(248) 552-4968
Voicemail, Fax, Pager
usman.taokeer@s-iii.com
Sent by: owner-nv-l@lists.us.ibm.com
07/11/2005 01:34 AM
|
|
To
| nv-l@lists.us.ibm.com
|
|
cc
|
|
|
Subject
| RE: [nv-l] Node Status
does not change |
|
Mike,
The netview is on the Windows BOX not on a UNIX. I
have been using NetView for more than an year now, and i've been using
Terminal services to access it, eversince i've applied the FP3 and started
using Switch Analyzer this problem has started, each and every IP network is
'Yellowed'. I dont know what the problem is : -
Is it FP3?
Is it Switch Analyzer?
Is it Terminal
Services?
What
does your experience say, how would you access NetView on Windows Machine?
Regards,
Usman Taokeer
Si3.
Mike Pearson
<pearsom@us.ibm.com>
Sent by:
owner-nv-l@lists.us.ibm.com
08-07-05 07:20 PM
|
Please respond
to
nv-l@lists.us.ibm.com |
|
|
To
| nv-l@lists.us.ibm.com
|
|
cc
|
|
|
Subject
| RE: [nv-l] Node Status does not
change |
|
Usman:
No, we
can not recommend a way to do this, just as we do not recommend the type of
emulator, such as Exceed etc, to access UNIX machines from Windows.
Others have used Exceed as an emulator just as others have used VNC to
log on to the NetView machine. Your choice would have to be based on the
experiences of others. I am sorry but that is the best advice I can give
you.
Regards,
Michael Pearson
Tivoli NetView for UNIX and NT Support
Building
660, Office CC105B;
HWY. 54 & 600 PARK OFFICES DR
Research
Triangle Park, N.C. 27709
(919)
254-2270
pearsom@us.ibm.com
******************************************************************
******************************************************************
Need
help with Tivoli Software Products?
Ask Tivoli!
http://www.tivoli.com/asktivoli
usman.taokeer@s-iii.com
Sent by:
owner-nv-l@lists.us.ibm.com
07/08/2005 09:31 AM
|
|
To
| nv-l@lists.us.ibm.com
|
|
cc
|
|
|
Subject
| RE: [nv-l] Node Status
does not change |
|
Mike,
The Tivoli server is in
our DataCenter, now i can't go in there and log on to the machine to work, is
there any recommended way to access Tivoli Serves remotely?
Regards,
usman
-----owner-nv-l@lists.us.ibm.com wrote: -----
To: nv-l@lists.us.ibm.com
From: Mike Pearson
<pearsom@us.ibm.com>
Sent by: owner-nv-l@lists.us.ibm.com
Date:
08/07/2005 04:29PM
Subject: RE: [nv-l] Node Status does not
change
Yes, NetView does not work if Terminal Services are used in
any way to connect to NetView.
Regards,
Michael Pearson
Tivoli NetView for UNIX and NT Support
Building 660, Office
CC105B;
HWY. 54 & 600 PARK OFFICES DR
Research Triangle
Park, N.C. 27709
(919) 254-2270
pearsom@us.ibm.com
******************************************************************
******************************************************************
Need help with Tivoli Software Products?
Ask Tivoli!
http://www.tivoli.com/asktivoli
"praveen kumar"
<praveenkumar.nair@ustri.com>
Sent by:
owner-nv-l@lists.us.ibm.com
07/07/2005 11:52 PM
|
|
To
| <nv-l@lists.us.ibm.com>
|
|
cc
|
|
|
Subject
| RE: [nv-l] Node Status
does not change |
|
Hi all,
Are there any issues if we connect through
terminal service? And apply commands???
|
Praveen
kumar
praveenkumar.nair@ustri.com
|
721, Nila
Technopark, Trivandrum
Tel:
++91-471-2335777 extn 8652
Cell: ++91-934-914-0942
|
From:
owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On
Behalf Of Mike Pearson
Sent: Thursday, July 07, 2005 9:34 PM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Node
Status does not change
Just a
wild question but are you using Terminal Services to access NetView in any
way?
Regards,
Michael Pearson
Tivoli NetView for UNIX and
NT Support
Building 660, Office CC105B;
HWY. 54 & 600 PARK
OFFICES DR
Research Triangle Park, N.C. 27709
(919) 254-2270
pearsom@us.ibm.com
******************************************************************
******************************************************************
Need help with Tivoli Software Products?
Ask Tivoli!
http://www.tivoli.com/asktivoli
usman.taokeer@s-iii.com
Sent by: owner-nv-l@lists.us.ibm.com
07/07/2005 11:56 AM
|
|
To
| nv-l@lists.us.ibm.com
|
|
cc
|
|
|
Subject
| [nv-l] Node Status
does not change |
|
Hi,
We are using
Netview 7.1.4 FP3. My NetView Map shows all nodes as Yellow (marginal). It was
working fine but suddenly all the nodes staus changed. Dont know what is
wrong, i logged in to one router manually shut down and and no shut an
interface then its status changed in the MAP (back to green). What is wrong,
is it Switch Analyzer or some NetView Deamon.
What should i look for?
Regards,
Usman Taokere
Si3
|