nv-l
[Top] [All Lists]

Re: [nv-l] Loadhosts with FP3

To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Loadhosts with FP3
From: Brett <bgillmore@gmail.com>
Date: Wed, 13 Jul 2005 20:20:51 +1200
Delivery-date: Wed, 13 Jul 2005 09:21:16 +0100
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=R6eHGEA/2slAqNPOLuU8ax6yBRA/UEydLD7mGkLRpK7ZbveY+bvaq/8kQ5aYVWKcFm3UBlcsbz2aW6pd7gKfKP2aUjPB0FRs9WnWmqRDU7M0Ma8196Vbneahvub3OGrd3Jf+e5xQL2gOVsSwj7v80S09Y3G4oo2cK9iYOvKG/nI=
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
In-reply-to: <20050713080836.904012725C@smtpintpos.ustri.com>
References: <20050713080836.904012725C@smtpintpos.ustri.com>
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
I'm having the same issue on my solaris boxes. However id does seem to
work ok if you add them into the netmon.seed file instead of the
loadhost. However I would like to figure it out. Also tried calling
support and they tried a bunch of things which none worked. ANyone
else getting this issue with the fix pack.

Also I noticed that fp3 also has a memory leak to boot, and fp4 won't
be out till october.

On 7/13/05, Anvaj A B <anvaj.aliyarukutty@ustri.com> wrote:
> 
> 
> Hi,
> 
>  
> 
> I am running Netview 7.1.4 with FP3 on Win2K Server.
> 
>  
> 
> I am facing issues with discovery of remote routers/firewalls. I have done
> quite lot of testing and found that I am able to discover the remote devices
> with out FP3 on NetView 7.1.4. As soon as I install FP3, I am not able to
> discover any new remote devices and the loadhosts command also fails
> 
>  
> 
> I have tested this with 2 netview 7.1.4 servers, S1 with FP3 and S2 without
> FP3
> 
>  
> 
> When I run the loadhosts command on S1 it throws out error messages and not
> showing on the NetView MAP. 
> 
>  
> 
>  C:\WINNT\system32\drivers\etc>loadhosts -m 255.255.255.0
> -v
> 
> 10.10.59.23 TestPC
> 
> Created host TestPC (3122) UP
> 
> Added UP interface 10.10.59.23 (3123) to TestPC
> 
> ERROR: Could not add node TestPC to topology: The requested object is
> unknown.
> 
> ^Z
> 
>  
> 
> 1 nodes added to database
> 
> 1 interfaces added
> 
>  
> 
>  
> 
> But the same command on the S2 work fine with out any issues. 
> 
>  
> 
> Is the FP3 creating this problem?  What exactly means by "Could not add node
> TestPC to topology". 
> 
> Please share your thoughts?
> 
>  
> 
>  
> 
> Best regards,
> 
>  
> 
>  
> 
> 
>  
> 
> 
> 
> 
> 
> Anvaj Aliyarukutty
> 
> anvaj.aliyarukutty@ustri.com
> 
> 
> 
> 721, Nila 
> Technopark, Trivandrum
> Tel: +91 471 233 5777 ext: 8653
> 
> 
> Fax: +91 471 252 7276
> Cell: +91 944 772 8103 
> 
> 
>  
> 
>


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web