Hi James,
Your guess is always correct...
It worked. thank you
USTechnology
Praveen kumar
praveenkumar.nair@ustri.com
721, Nila
Technopark, Trivandrum
Tel: ++91-471-2335777 extn 8652
Cell: ++91-934-914-0942
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On
Behalf Of James Shanks
Sent: Wednesday, July 20, 2005 6:29 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] how to collect cpu utilization of pix
This is just a guess but I think the MIB browser and snmpcollect may be
confused by the range value appended to the type without an intervening
space. From the error message it would appear that they think that
"gauge" and "gauge(1...100)" are not the same thing. So try this.
1. Make a copy of the Cisco Process MIB.
2. Edit it and find the object(s) you want to collect, and put a space
between the word "gauge" and the range "(1...100)".
3. Use loadmib to unload the original Cisco Process MIB and load instead
your modified copy.
4. Try collecting on that.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
"praveen kumar"
<praveenkumar.nai
r@ustri.com> To
Sent by: <nv-l@lists.us.ibm.com>
owner-nv-l@lists. cc
us.ibm.com
Subject
RE: [nv-l] how to collect cpu
07/20/2005 04:17 utilization of pix
AM
Please respond to
nv-l
Hi Collins,
The cpu utilization of pix 515e
the mib : CISCO-PROCESS-MIB
oid : .1.3.6.1.4.1.9.9.109.1.1.1.1.4
name:
.iso.org.dod.internet.private.enterprises.cisco.ciscoMgmt.ciscoProcessMIB.ci
scoProcessMIBObjects.cpmCPU.cpmCPUTotalTable.cpmCPUTotalEntry.cpmCPUTotal1mi
n
---------------------------------|
(Embedded image moved to file:| |
pic18065.jpg)USTechnology | |
---------------------------------|
Praveen kumar
721, Nila
praveenkumar.nair@ustri.com Technopark, Trivandrum
Tel: ++91-471-2335777 extn 8652
Cell: ++91-934-914-0942
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On
Behalf Of Colin Mulkerrins
Sent: Wednesday, July 20, 2005 1:35 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] how to collect cpu utilization of pix
More information please - whats the mib object id you tried? what cpus do
you want to collect data for (cisco?)?
Regs
Colin M.
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com
[mailto:owner-nv-l@lists.us.ibm.com] On Behalf Of praveen kumar
Sent: 20 July 2005 08:54
To: nv-l@lists.us.ibm.com
Subject: [nv-l] how to collect cpu utilization of pix
Hi all,
I am running netview for windows 7.1.4
I wanted to collect data of the cpu utilization, I loaded the cico
process mib able to get the online graph unable to collect the data,
the error is
(collector can collect numeric values for this mib .the collection
was not added because the type is gauge(1..100) )
How to collect any ideas???
Thanks in advance
---------------------------------|
(Embedded image moved to file:| |
pic24256.jpg)USTechnology | |
---------------------------------|
Praveen kumar
721, Nila
praveenkumar.nair@ustri.com Technopark, Trivandrum
Tel: ++91-471-2335777 extn 8652
Cell: ++91-934-914-0942
****************************************************************************
*****
This e-mail and its attachments, is confidential and is intended for the
addressee(s) only. If you are not the intended recipient, disclosure,
distribution or any action taken in reliance on it is prohibited and may be
unlawful. Please note that any information expressed in this message or its
attachments is not given or endorsed by An Post unless otherwise indicated
by an authorised representative independently of this message. An Post does
not accept responsibility for the contents of this message and although it
has been scanned for viruses An Post will not accept responsibility for any
damage caused as a result of a virus being passed on.
****************************************************************************
*****
|