Many thanks to you too..
Excuse me but I did not see you answer so I forward further insight to
John...
At the moment, I never have used LVM. In what situation in suitable?
BR,
rocsca
----- Original Message -----
From: "Mark Sklenarik" <marksk@us.ibm.com>
To: <nv-l@lists.us.ibm.com>
Sent: Friday, July 29, 2005 2:49 PM
Subject: Re: [nv-l] IBM Tivoli Netview for Linux Installation
> Some additional ideas
> root "/" on SLES needs to be at least 3-4 GB,
> The reason being is if you plan to perform online up dates, Yast2
> needs some place to copy the files to, until they are installed. I have
> yet to determine where online update puts the temp install files, I found
> this when an update failed and hung my machine, had to reinstall the OS.
>
> Do not forget to create your swap space, with 4Gb of ram, normally test
> makes a swap space 4 GB also
>
> I would also suggest after creating /, /boot, and swap space, you use LVM
> functions of SLES 9, this will allow you to grow a file system if you
> originally make it to small.
>
> /usr/OV - the Tivoli test organization normal sets this to about 4 GB,
> this allows room for the large trace files we sometime need to get.
>
> /opt - the Tivoli test organization normal sets this to about 4 GB,
> since we end up install a number of other products on test systems.
>
> Mark F Sklenarik IBM SWG Tivoli Solutions Quality Assurance Business
> Impact Management and Event Correlation Software Quality Engineer
>
>
>
>
> John M Gatrell <John.Gatrell@uk.ibm.com>
> Sent by: owner-nv-l@lists.us.ibm.com
> 07/29/2005 08:05 AM
> Please respond to
> nv-l
>
>
> To
> nv-l@lists.us.ibm.com
> cc
>
> Subject
> Re: [nv-l] IBM Tivoli Netview for Linux Installation
>
>
>
>
>
>
>
> Just some hints, not to be taken as gospel (I am more familiar with other
> flavours of linux).
> Chances are a Xeon system has hardware raid so you will just see 1 disk of
> 73.4GB
> Starting from the standard install scheme, then
>
> Reduce size of /home to very small (1GB)
>
> In case you ever put other products on such as IBM java, or Tivoli gateway
> add a /opt partition.
> /opt should be at least 2GB.
>
> Keep the root partition '/' small.
> Have a separate /boot partition.
>
> Netview is best in it's own /usr/OV partition.
>
> Split the rest of the disk into 2 partitions called
> /usr and /usr/OV
> say 30% to /usr and 60% to /usr/OV
>
> John Gatrell, BA, AIX Cert Specialist, Cisco CCNA.
>
>
> I need to install IBM Tivoli Netview 7.1.4 on a server IBM xSeries 336:
>
> - 2 x Processor Xeon 3.2 GHz/800MHz 1MB L2 Cache EM64T
> - 2 x HD 73.4 GB
> - 4GB ECC DDR2 SDRAM RDIMM
>
> with OS SLES 9.
>
> I'ld like to figure out what is the best partition scheme to use for my
> platform.
>
> Many Thanks,
>
> rocsca
>
|