Checkout the ITSA Troubleshooting Field Guide in my earlier append.
Cheers,
Jane
usman.taokeer@s-iii.com wrote:
Hi,
Using NetView 7.1.4 FP03 windows 2003 Std, Switch Analyzer 1.3 .
We have Four (4) Enterasys switches, two of them are working as L3
switches and rest are standard L2 all of them has the same OID's, when
i issue the ovtopodump -X command it says NO in L2 OID colunm of all
these switches, but the L2 status is set to UP!. Its layer2 status is
also showing as Marginal in the topo map and an interface 1.0.0.0 is
also down. Any clues on how to fix this?
And One more disturbing problem is happening with one of my Cisco 3745
router, after installing ITSA that router is contiguously showing as
Marginal (Yellow),when i checked it shows the Serial links as
Marginal i don't know why ?
Many thanks in advance!
Regards,
Usman Taokeer
Si3.
--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2005 Jane Curry <jane.curry@skills-1st.co.uk>. All rights
reserved.
|