As I told you before. the nvcorrd log will show the event, with the
command to be executed, being sent to actionsvr. The actionsvr logs.
nvaction.alog/blog should show that command being received, at the same
timestamp as in the nvcorrd.log. If the script fails for some reason,
that too should be logged in the nvaction.alog/blog.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
Mario Behring
<mariobehring@yah
oo.com> To
Sent by: nv-l@lists.us.ibm.com
owner-nv-l@lists. cc
us.ibm.com
Subject
Re: [nv-l] script not running on
08/16/2005 04:57 ruleset
PM
Please respond to
nv-l
James...that´s the problem...I think that the script is not being
executed...and so far I do not know why...how can I be sure that the
script is executed ?
Thanks
Mario
--- James Shanks <jshanks@us.ibm.com> wrote:
> If the script is being executed, then there is nothing more to be done
> on
> the NetView side.
> You'd need a diagnostic tool from TEC to see anything after that. They
> own
> postemsg and the library where the code resides.
> That's all the advice I can give you.
> HTH
>
> James Shanks
> Level 3 Support for Tivoli NetView for UNIX and Windows
> Tivoli Software / IBM Software Group
>
>
>
>
> Mario Behring
>
> <mariobehring@yah
>
> oo.com>
> To
> Sent by: nv-l@lists.us.ibm.com
>
> owner-nv-l@lists.
> cc
> us.ibm.com
>
>
> Subject
> Re: [nv-l] script not running on
>
> 08/16/2005 04:36 ruleset
>
> PM
>
>
>
>
>
> Please respond to
>
> nv-l
>
>
>
>
>
>
>
>
>
> James,
>
> You´re right...I am also running the internal adapter, but the
> BufferEvents was set to NO for the postemsg command (I am using the -f
> option pointing to a configuration file). In any case, just to see if
> something happens, I´ve changed the BufferEvents to YES and set the
> BufEvtPath a path different from the one that the internal adapter is
> using (the default).
>
> Also, I have two different NV rulesets, one that the internal adapeter
> points to and the other that calls the "Action" box, which calls the
> postemsg script. The script gets the NVATTR_? variables from the memory
> when the event occurs and fill the postemsg attributes...but still no
> event reaches the TEC....
>
> Thanks.
>
> Mario
>
>
>
>
>
>
>
> --- James Shanks <jshanks@us.ibm.com> wrote:
>
> > Are you also running the internal TEC adapter? Then you must specify
> > different and unique BufEvtPath values for the internal adapter (in
> your
> > tecint.conf) and on your postemsg command, or the TEC library code in
> > each
> > case will try to write to the same cache files and the two processes
> > will
> > interfere with each other doing cache management.
> >
> > You can issue the command "nvcdebug -n" to see what rulesets nvcorrd
> is
> > running by looking in the nvcorrd.alog. And if you want to see it
> > process
> > traps through them, issue "nvcdebug -d all". Look for the eyecatcher
> > "Received a trap" and "Finished with the trap" in the log. Everything
> > that
> > happens in between is him processing that event. The nvcorrd.alog and
> > blog
> > swap every thousand lines or so. But during the processing of your
> > trigger
> > trap, you should see him hand it off to actionsvr. And you should
> also
> > see in actionsvr's nvaction.alog/blog that same event coming in and
> the
> > results of your script being logged.
> >
> > If that's not enough to help, I suggest you call Support.
> >
> > James Shanks
> > Level 3 Support for Tivoli NetView for UNIX and Windows
> > Tivoli Software / IBM Software Group
> >
> >
> >
> >
> > Mario Behring
> >
> > <mariobehring@yah
> >
> > oo.com>
> > To
> > Sent by: NetView List
> >
> > owner-nv-l@lists. <nv-l@lists.us.ibm.com>
> >
> > us.ibm.com
> > cc
> >
> >
> >
> > Subject
> > 08/16/2005 10:22 [nv-l] script not running on
> >
> > AM ruleset
> >
> >
> >
> >
> >
> > Please respond to
> >
> > nv-l
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Hi list,
> >
> > I have a ruleset that executes an "Action" box that calls a script
> that
> > send the event to the TEC server using the postemsg
> command....however,
> > no
> > event ever reaches the TEC. It seems to me that the ruleset is not
> even
> > executing the script.
> >
> > Any ideas ?
> >
> > env: NV714 FP03 on AIX 5.2
> >
> > Thanks.
> >
> > Mario
> >
> >
> >
> > ____________________________________________________
> > Start your day with Yahoo! - make it your home page
> > http://www.yahoo.com/r/hs
> >
> >
> >
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
>
>
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
|