Hi james,
I have corrected the syntax issue and it got loaded ,then when I tried to
use the mib browser I can see the mib there but not able to browse through
the entire tree the needed object id there when I tried to get the values
what is available it gives me an error saying error status :2,no such
variable. I am stuck here, any thoughts of how to proceed .
True regards,
USTechnology
Praveen kumar
praveenkumar.nair@ustri.com
721, Nila
Technopark, Trivandrum
Tel: ++91-471-2335777 extn 8652
Cell: ++91-934-914-0942
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On
Behalf Of James Shanks
Sent: Wednesday, September 07, 2005 8:19 PM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] mib loading failed
Then there is a syntax issue with the MIB such that the SNMPv1 loader
cannot parse it.
Generally this results from there not being spaces between the constructs
since the V1 parses relies on spaces to separate the elements, which it
then matches to a list of keywords.
You can try editing the MIB itself at the line indicated in the error
message and try to make the constructs more intelligible. If that doesn't
work, then you should call Support.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
"praveen kumar"
<praveenkumar.nai
r@ustri.com> To
Sent by: <nv-l@lists.us.ibm.com>
owner-nv-l@lists. cc
us.ibm.com
Subject
RE: [nv-l] mib loading failed
09/07/2005 10:34
AM
Please respond to
nv-l
Hi James,
I tried with snmpv1 still the same error ,what to do?
USTechnology
Praveen kumar
praveenkumar.nair@ustri.com
721, Nila
Technopark, Trivandrum
Tel: ++91-471-2335777 extn 8652
Cell: ++91-934-914-0942
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] On
Behalf Of James Shanks
Sent: Wednesday, September 07, 2005 6:54 PM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] mib loading failed
You are trying to load an SNMPv2 MIB with the SNMP v1-only MIB loader.
You have three options.
(1) Use the native SNMPv1-v2 loader and browser which are not on the
Windows GUI menus.
You load using loadmibv2 and your browse using browserv2 issued from
the command line.
(2) Use the web browser since you have already loaded the MIB with that.
(3) Go out to the Cisco website and download the SNMPv1 copy of the MIB and
load that with the same loader you got the error on.
ftp://ftp.cisco.com/pub/mibs/v1
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
|