RE: [nv-l] NV Events not displaying in TEC

[usman.taokeer@s-iii.com]

Yes it was working fine, eversince we
installed the 'TEC FP03' it stopped working.

"Van Order, Drew \(US - Hermitage\)" <dvanorder@deloitte.com>
Sent by: owner-nv-l@lists.us.ibm.com

11/11/2005 18:48

Please respond to
nv-l@lists.us.ibm.com

To	<nv-l@lists.us.ibm.com>
cc
Subject	RE: [nv-l] NV Events not displaying in TEC

Has it been working, or are
you trying to get it going the first time? If it has been working, and
you are using the non-TME adapter, check tecint.conf. We had one server
suddenly stop after months of working fine--turns out we needed the BufEvtPath=/usr/OV/log/tec_cache
setting because of conflicts with postemsg. I could see all the nvserverd
events sitting in /etc/Tivoli/tec/cache. I understood the explanation,
but we had been using postemsg all along..so why quit then? 
 
Been fine ever since
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of usman.taokeer@s-iii.com
Sent: Friday, November 11, 2005 6:23 AM
To: nv-l@lists.us.ibm.com
Subject: [nv-l] NV Events not displaying in TEC


Hi, 

FW 4.1.1 FP03 
TEC 3.9 FP03 
NV 7.1.4 FP03 

Windows 2000 Server SP4 

Just installed TEC 3.9's FP 03 since Netview events are not showing up
in TEC, Baroc file loaded compiled but yet no events? Am i missing anything
do i need to update any .rls or .baroc files for netview? 


Regards, 
Usman 
Si3. 


This message (including any attachments)
contains confidential information intended for a specific individual and
purpose, and is protected by law.  If you are not the intended recipient,
you should delete this message. 

Any disclosure, copying, or distribution
of this message, or the taking of any action based on it, is strictly prohibited.
[v.E.1]