nv-l
[Top] [All Lists]

RE: [nv-l] Alternative to NVMail

To: <nv-l@lists.us.ibm.com>
Subject: RE: [nv-l] Alternative to NVMail
From: <P.Abdulgafoor@iflexsolutions.com>
Date: Tue, 6 Dec 2005 18:13:45 +0530
Delivery-date: Tue, 06 Dec 2005 12:40:53 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
Thread-index: AcX6XUs5i9L92/t7R12aKT/C2PlwaAAArO7g
Thread-topic: [nv-l] Alternative to NVMail
Thank you James!!
But I have checked with Mail Admin and as per him it is from NVMail
only! Anyway I will have to search for some other tool.

Best Regards,
Abdul Gafoor


-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of James Shanks
Sent: Tuesday, December 06, 2005 5:15 PM
To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Alternative to NVMail
Importance: Low

nvmail is not sending those messages.  Your SMTP mail server is.  nvmail
just sends the message you designate to an SMTP mail server you also
designate.    That's all.   You need to configure, or the owner of that
server, needs to configure it, if you don't like the results.

NetView does not provide a mail tool other than nvmail. And even that is
only a front-end to something else.
But you are free to search the web and find any other tool you like.

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group


 

             <P.Abdulgafoor@if

             lexsolutions.com>

             Sent by:
To 
             owner-nv-l@lists.         <nv-l@lists.tivoli.com>

             us.ibm.com
cc 
 

 
Subject 
             12/06/2005 05:53          [nv-l] Alternative to NVMail

             AM

 

 

             Please respond to

                   nv-l

 

 





Hi,

   Being very new  in Tivoli Netview (using Netview 7.1.4 for Windows),
I
would like to know ,can I use any other mailing utility other than
NVMail.If not, is it possible to remove the following entries from
NVMail
Message   since it doesn't look meaningful!!!
                                           "Return-Path:
   Administrator@IPTEC
                       Message-ID:
<FMGRTxY5ksqQFxnPagM0000afc0@fmgrt.rt.i-flex.com>
                       X-OriginalArrivalTime: 05 Dec 2005 12:00:35.0128
(UTC) FILETIME=[7FE6FB80:01C5F993]"

  If anybody can give a solution for this, will be well appreciated as
we
are recently switched from another other NMS Tool to Netview where we
were
getting Mail alerts properly.


Best Regards,
Abdul Gafoor






<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web