Tivoli Netview 7.1.4 FP03 AIX 5.2
I have cisco devices that sends me SNMP V2c traps.But from this device I
receive only V1 traps on my netview so i started to look at documentation
and I found that there is an API which transform V2 traps into V1 format in
order that Netview can handle it.
The problem is that specific V2 traps like coldstart warmstart linkUp and
Linkdown stay in the V2 Format with the EID 126.96.36.199.188.8.131.52.5.
I add the description of this trap in the trapd.conf (as I do for a normal
V1 traps) and add them in my rulsets in order to forward them to the TEC.
What I have seen is that in the trapd.log the traps are correctly
translated the way I want but there are not forwarded to the TEC.
I test with a Dynamic workspace with my rulestes and saw that they pass my
filter and are well translated but are not send to TEC.
I verify in the nvserved.log ( with the tracevent to YES in tecint.conf)
and I don't see my V2 generic traps.
Why the generic traps are not transformed by the API into the V1 format?
Why my V2 generic traps goes through my filter but are not forwarded to
Kind Regards/Cordialement/S pozdravem.
IGS - Network Delivery Support Center
Tel : +33 (0) 492 114 767
Archive operated by Skills 1st Ltd
See also: The NetView Web