Re: [nv-l] Another MIB Question?

[Joe Fernandez <jfernand@kardinia.com>]

Larry,

Do you specifically want to use this version of the MIB?

Cisco has a later version of this MIB on its web site. Your version has a
2002 timestamp (see below) and there is a 2004 version out.

The latest version no longer requires CISCO-TC, so all you need to run
mib2trap is to prepend CISCO-SMI. 


At 01:44 PM 18-04-06 -0700, you wrote:
> Guys,
> I have question here on the mib i'm working on. This is the MIb file.
> "CISCO-CONTENT-ENGINE-MIB.my". I'm running mib2trap on this and
> obviously i'm not getting any OID's for the traps since i have not yet
> concatenated the other MIB files into one. 
> Can anyone tell me what are the MIB's i should concatenate based on the
> imports section from the above MIb file. And what is the order to
> concatenate. Part of the imports is below:
>
> CISCO-CONTENT-ENGINE-MIB DEFINITIONS ::= BEGIN
>
> IMPORTS
>     MODULE-IDENTITY, 
>     OBJECT-TYPE, 
>     NOTIFICATION-TYPE,
>     Counter32,
>     Counter64,
> Gauge32                 
> FROM SNMPv2-SMI
>     MODULE-COMPLIANCE, OBJECT-GROUP,
>    
> NOTIFICATION-GROUP                 
> FROM SNMPv2-CONF
>    
> Unsigned32                         
> FROM CISCO-TC
>    
> ciscoMgmt                          
> FROM CISCO-SMI;
>
> ciscoContentEngineMIB MODULE-IDENTITY
>     LAST-UPDATED "200205200000Z"
>
>
> Should it just be "CISCO-TC", "CISCO-SMI" &
> " CISCO-CONTENT-ENGINE-MIB.my"?
> Many Thanks as usual.
>
> Larry
>
>
>
>
> Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great
> rates starting at 1¢/min.

Joe Fernandez

Kardinia Software

jfernand@kardinia.com

www.kardinia.com