Perhaps. That's the point of doing it. You want to make certain that you
have not missed anything.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
"D'Apice,
Domenico"
<D.D'Apice@SAQ.qc To
.ca> <nv-l@lists.us.ibm.com>
Sent by: cc
owner-nv-l@lists.
us.ibm.com Subject
RE: [nv-l] Importing modifying trap
in the gui from NV 7.1.3 to NV
05/25/2006 09:35 7.1.4
AM
Please respond to
nv-l@lists.us.ibm
.com
OK now it more clear, but
One thing to be sure, the trapd.diff.out file should be empty if i do step
1 and 2 before, am i right ?
Thanks a lot
Dominic
-----Message d'origine-----
De : owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] De la
part de James Shanks
Envoyé : May 25, 2006 9:27 AM
À : nv-l@lists.us.ibm.com
Objet : RE: [nv-l] Importing modifying trap in the gui from NV 7.1.3 to NV
7.1.4
May be this will help.
There are no structural differences in trapd.conf between 7.1.3 and 7.1.4,
only in content. So yes, if you just want to drop down your 7.1.3 file on
a 7.1.4 system you can do that.
The only trapd.conf file which trapd loads on an English-language NetView
is the one in /usr/OV/conf/C.
There is a very old trapd.conf, much smaller than the one in the C
directory, which is a holdover for the migration process from NetView
Version 2 to NetView Version 3 when the product was internationalized. It
should have been removed years ago but never was. You can delete it.
When NetView is installed an unmodified copy of trapd.conf for that version
is installed in /usr/OV/newconfig/OVSNMP-RUN/trapd.conf
So the process we have been suggesting is.
(1) Shut down trapd (you might as well stop all the daemons) on your 7.1.4
system and put your 7.1.3 trapd.conf in /usr/OV/conf/C
(2) nvaddtrapdconf /usr/OV/newconfig/OVSNMP-RUN/trapd.conf
(3) diff -w /usr/OV/conf/C/trapd.conf
/usr/OV/newconfig/OVSNMP-RUN/trapd.conf > trapd.diff.out
(4) The trapd.diff.out will tell you which lines are different in the two
files and you can make whatever additional changes you want to bring your
new trapd.conf up to speed with 7.1.4.
(5) Restart the daemons ( use /etc/netnmrc if you stop nvsecd)
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows Tivoli Software /
IBM Software Group
"D'Apice,
Domenico"
<D.D'Apice@SAQ.qc To
.ca> <nv-l@lists.us.ibm.com>
Sent by: cc
owner-nv-l@lists.
us.ibm.com Subject
RE: [nv-l] Importing modifying trap
in the gui from NV 7.1.3 to NV
05/25/2006 09:09 7.1.4
AM
Please respond to
nv-l@lists.us.ibm
.com
Not sure i understand clearly,
Can i only replace the the NV 7.1.4 trapd.conf file (on server X) by the
NV 7.1.3 trapd.conf file (on server Y) ?
If yes, which trapd.conf file ? The one in /usr/OV/conf/C ?
Dominic
-----Message d'origine-----
De : owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] De la
part de James Shanks Envoyé : May 25, 2006 8:16 AM À :
nv-l@lists.us.ibm.com Objet : RE: [nv-l] Importing modifying trap in the
gui from NV 7.1.3 to NV
7.1.4
You can shorten this process a bit by making the 7.1.3 trapd.conf your
current one, and then using
nvaddtrapdconf /usr/OV/newconfig/OVSNMP-RUN/trapd.conf
nvaddtrapdconf will not alter existing entries but it will add in any that
are completely new.
Then you can follow Bill's procedure to merge in your differences.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows Tivoli Software /
IBM Software Group
"Evans, Bill"
<Bill.Evans@hq.do
e.gov> To
Sent by: nv-l@lists.us.ibm.com
owner-nv-l@lists. cc
us.ibm.com
Subject
RE: [nv-l] Importing modifying trap
05/24/2006 04:58 in the gui from NV 7.1.3 to NV
PM 7.1.4
Please respond to
nv-l@lists.us.ibm
.com
I had that problem last year. I ran DIFF against the current 7.1.3
/usr/OV/conf/C/trapd.conf and the one in
/usr/OV/newconfig/OVSNMP-RUN/trapd.conf to identify the differences.
>From there it was a manual effort to merge the changes into the new
7.1.4 file.
Bill Evans
DOE NetView Support
301 903 0057 -- office
570-639-5691 -- home
570-852-9549 -- cell
-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of D'Apice, Domenico
Sent: Wednesday, May 24, 2006 4:48 PM
To: nv-l@lists.us.ibm.com
Subject: [nv-l] Importing modifying trap in the gui from NV 7.1.3 to NV
7.1.4
Hi Guys,
Just wanna know how can i export/import all traps we have modify (in the
Netview gui : Event configuration / Trap customization : SNMP) ?
If this is possible, can i export/import it from Netview 7.1.3 to Netview
7.1.4 ?
Thanks
Dominic D'Apice
* D.D'Apice@saq.qc.ca
|