|
The whole mib isn't very long but there are two other mibs
without traps identified i.e. just sets of OBJECT-TYPE definitions but these
have loaded without a problem. I now suspect the IMPORTS section is longer than
I thought.
The problem mib is starts with
DATAPOWER-NOTIFICATION-MIB DEFINITIONS
::= BEGIN
-- Programmatically Generated; do not edit
IMPORTS
enterprises, MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; dpNotificationMIB
MODULE-IDENTITY
LAST-UPDATED "200404210000Z" ORGANIZATION "DataPower Technology, Inc." CONTACT-INFO "DataPower Technology, Inc. Postal: DataPower Technology, Inc. One Alewife Center 4th Floor Cambridge, MA 02140 Phone: +1 617 864 0455 Email: csupport@datapower.com" DESCRIPTION "The MIB module for notifications of a DataPower XML device." REVISION "200404210000Z" DESCRIPTION "Updated" ::= {
dpModules 3 }
datapower OBJECT IDENTIFIER
::= { enterprises 14685 }
dpModules OBJECT IDENTIFIER
::= { datapower 2 }
dpManagement OBJECT
IDENTIFIER ::= { datapower 3 }
dpNotifications OBJECT
IDENTIFIER ::= { dpManagement 3 }
dpNotificationElements OBJECT
IDENTIFIER ::= { dpNotifications 1 }
The other two mibs start
DATAPOWER-CONFIG-MIB DEFINITIONS ::=
BEGIN
-- Programmatically Generated; do not edit
IMPORTS
enterprises, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; dpConfigMIB
MODULE-IDENTITY
LAST-UPDATED "200401140000Z" ORGANIZATION "DataPower Technology, Inc." CONTACT-INFO "DataPower Technology, Inc. Postal: DataPower Technology, Inc. One Alewife Center 4th Floor Cambridge, MA 02140 Phone: +1 617 864 0455 Email: csupport@datapower.com" DESCRIPTION "The MIB module for configuration of a DataPower XML device." REVISION "200401140000Z" DESCRIPTION "Updated"
::= { dpModules 2 }
datapower OBJECT IDENTIFIER
::= { enterprises 14685 }
dpModules OBJECT IDENTIFIER
::= { datapower 2 }
dpManagement OBJECT
IDENTIFIER ::= { datapower 3 }
dpConfig OBJECT IDENTIFIER
::= { dpManagement 2 }
and
DATAPOWER-STATUS-MIB DEFINITIONS ::=
BEGIN
-- Programmatically Generated; do not edit
IMPORTS
enterprises, MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Counter32, Unsigned32 FROM
SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, MacAddress, TimeInterval, TimeStamp FROM SNMPv2-TC dpConfigXMLManagerIndex, dpConfigLogTargetIndex, dpConfigSLMPolicyIndex, dpConfigLoadBalancerGroupIndex, dpConfigCountMonitorIndex, dpConfigMessageTypeIndex, dpConfigDurationMonitorIndex, dpConfigMQQMIndex, dpConfigWSGatewayIndex, dpConfigTibcoEMSServerIndex, dpConfigWebSphereJMSServerIndex, dpConfigUDDISubscriptionIndex FROM
DATAPOWER-CONFIG-MIB;
dpStatusMIB
MODULE-IDENTITY
LAST-UPDATED "200401140000Z" ORGANIZATION "DataPower Technology, Inc." CONTACT-INFO "DataPower Technology, Inc. Postal: DataPower Technology, Inc. One Alewife Center 4th Floor Cambridge, MA 02140 Phone: +1 617 864 0455 Email: csupport@datapower.com" DESCRIPTION "The MIB module for status monitoring of a DataPower XML device." REVISION "200401140000Z" DESCRIPTION "Updated"
::= { dpModules 1 }
IpNetworkAddress ::=
TEXTUAL-CONVENTION
DISPLAY-HINT "1d.1d.1d.1d/1d.1d.1d.1d" STATUS current DESCRIPTION "An IP Network and mask" SYNTAX OCTET STRING (SIZE(8)) DPTimeIntervalSeconds ::=
TEXTUAL-CONVENTION
STATUS current DESCRIPTION "A unit of time expressed in seconds" SYNTAX INTEGER DPTimeIntervalMillis ::=
TEXTUAL-CONVENTION
STATUS current DESCRIPTION "A unit of time expressed in milliseconds" SYNTAX INTEGER datapower OBJECT IDENTIFIER
::= { enterprises 14685 }
dpModules OBJECT IDENTIFIER
::= { datapower 2 }
dpManagement OBJECT
IDENTIFIER ::= { datapower 3 }
dpStatus OBJECT IDENTIFIER
::= { dpManagement 1 }
If something looks odd then I'm happy to submit it as a
problem but I was assuming it was something I was doing
wrong.
Thanks
Jane
From: nv-l-bounces@lists.ca.ibm.com [mailto:nv-l-bounces@lists.ca.ibm.com] On Behalf Of James Shanks Sent: 28 February 2007 15:21 To: Tivoli NetView Discussions Subject: Re: [NV-L] Problems loading mib If those are the only IMPORTS listed then I'm as puzzled as you are. Perhaps
you could cut-and -paste the first page of the MIB here. Because something is
missing. No enterprise name or object id for trap dpLogNotification, (6,1).No enterprise name or object id for trap dpLogInternalNotification, (6,2). If you want personal help, then open a problem to Support and send NetView
Level 2 the MIB.
This is my first ever post so apologies if I miss things out. I'm running Netview 7.1.4 with fix pack 4 on AIX 5.2 I'm trying to load a mib and I'm getting xnmloadmib2 -load
drNotification.mib These are the only two traps in the mib I've no idea what this means. I tried to run mib2trap and
got
Do I have a previous mib missing? The only IMPORTS in my mib
are
I believe these should already be loaded although I've had problems before on mibs which made me think that SNMPv2-SMI wasn't loaded but having read other people's posts I suspect I might be wrong. Can you offer any pointers? Thanks Jane
. . -------------------------------------------------------------------------------------------------------------------- HBOS plc, Registered in Scotland No. SC218813. Registered Office: The Mound, Edinburgh EH1 1YZ. HBOS plc is a holding company, subsidiaries of which are authorised and regulated by the Financial Services Authority. ============================================================================== _______________________________________________ NV-L mailing list NV-L@lists.ca.ibm.com Unsubscribe:NV-L-leave@lists.ca.ibm.com http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only) |
JaneTaylor@hbosplc.com