Re: [NV-L] Discovery questions

[Leslie Clark <lclark@us.ibm.com>]

Try 
    nvUtil e '(isInterface=True)'
'%IP Address%,%Selection Name%,%SNMP ifPhysAddr%'

For the sample interface below, that
would give
172.16.5.20,thisnode.mydomaincom:eth1,0x001321AF82F5

# ovobjprint -s thisnode.mydomain.com:eth1
           
    OBJECTID              
 SELECTION NAME

OBJECT: 6054

        FIELD ID
       FIELD NAME          
           FIELD VALUE
        10  
           Selection Name      
           "thisnode.mydomaincom:eth1"
        14  
           OVW Maps Exists    
            1
        15  
           OVW Maps Managed    
           1
        24  
           SNMP ifType      
              Ethernet CSMACD(6)
        25  
           SNMP ifPhysAddr    
            "0x001321AF82F5"
        26  
           SNMP ifDescr      
             "eth1"
        27  
           SNMP ifSpeed      
             100000000
        37  
           IP Address      
               "172.16.5.20"
        39  
           IP Subnet Mask      
           "255.255.255.0"
        40  
           IP Status      
                Normal(2)
        83  
           isCard        
                 TRUE
        84  
           isInterface      
              TRUE
        89  
           isHSRP        
                 FALSE
        95  
           isIP        
                   TRUE
        173  
          XXMAP Protocol List      
      "IP"
        174  
          XXMAP SAPs Used List      
     0
        202  
          TopM Network ID      
          6058
        203  
          TopM Segment ID      
          6059
        204  
          TopM Node ID        
           6055
        1520  
         default IP Symbol List    
     10376
#


See also that tool script 'macem.sh'
I left there that looks up the mac in Netview for a list of IP addresses.


Cordially,

Leslie A. Clark
IT Services Specialist, Network Mgmt
Information Technology Services Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager

"Kain, Becki \(B.\)" <bkain1@ford.com>
Sent by: nv-l-bounces@lists.ca.ibm.com

04/30/2007 04:15 PM

Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>

To	"Tivoli NetView Discussions" <nv-l@lists.ca.ibm.com>
cc
Subject	[NV-L] Discovery questions

Oh gentle learned people, I have some questions
for a discovery that we are doing:

1.  i'm scanning by lists of whole ranges of ip's, listed ip by ip in the seedfile.  Some things may not be in dns and I'm looking for all things on that network segment, be them servers, routers, switches, etc..  They may or may not have snmp enabled.  I was teasing this data out of the database with "nvUtil e isNode=TRUE" but is there a better way?

2.  if snmp is enabled, is there an easy way to get all the mac addresses of all of the interfaces of a device?  

Thank you in advance

-Becki Kain _______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)

_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)