RE: [NV-L] RFI - no color propagation

["Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>]

Good morning,

 

I apologize for such short wording and don't mind the "white" node.

 

After I sent my email yesterday, we witnessed a remote site router go "white" in Netview. All downstream nodes were still green (working as designed).  The parent map turned red to alert us that there was a problem in a submap.

 

Before we experienced this I was reading and interpreting (incorrectly) that a parent map would not change color to alert the service desk folks that there was a problem with a device on a submap.

 

Thank you for your continued support,

Kevin Sperry
IT Analyst, Data Center Monitoring Control
nationalgrid
7437 Henry Clay Blvd. Bldg#3
Liverpool, NY 13088
Phone:  (315) 460-2688 Internal: 829-2688
Kevin.Sperry@us.ngrid.com

 

---

From: nv-l-bounces@lists.ca.ibm.com [mailto:nv-l-bounces@lists.ca.ibm.com] On Behalf Of Leslie Clark
Sent: Wednesday, May 06, 2009 6:59 PM
To: Tivoli NetView Discussions
Subject: Re: [NV-L] RFI - no color propagation

White means unreachable and it is 
not my fault. The router causing the problem will be red, or yellow if it is 
only one interface causing the problem. 
I would be cautious about messing with this. Probably if you use more 
words, I can figure out what you are really asking and make a suggestion. 
Feel free to try again. 

Cordially,

Leslie A. Clark
IT Services 
Specialist, Network Mgmt
Information Technology Services Americas
IBM 
Global Services
(248) 552-4968 Voicemail, Fax, Pager

"Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>
Sent by: nv-l-bounces@lists.ca.ibm.com

05/06/2009 02:07 PM

Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>

To	"Tivoli NetView Discussions" <nv-l@lists.ca.ibm.com>
cc
Subject	[NV-L] RFI - no color propagation

Hello,

With NV 7.1.5 on AIX, I have enabled RFI, netmon -K1 mode.  I have read some documentation in the NV manuals and other NV users' email from this site.

Is there no way to propagate the white color of a downed router in a submap to the home map?

Thank you,

Kevin Sperry
IT Analyst, Data Center Monitoring Control
nationalgrid
7437 Henry Clay Blvd. Bldg#3
Liverpool, NY 13088
Phone:  (315) 460-2688 Internal: 829-2688
Kevin.Sperry@us.ngrid.com

********************************************************************************
This e-mail and any files transmitted with it, are confidential to National Grid and are intended solely for the use of the individual or entity to whom they are addressed.  If you have received this e-mail in error, please reply to this message and let the sender know._______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)

********************************************************************************
This e-mail and any files transmitted with it, are confidential to National Grid and are intended solely for the use of the individual or entity to whom they are addressed.  If you have received this e-mail in error, please reply to this message and let the sender know.

_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)