|
My netmon expert says there is no theoretical limit but that we don't recommend using very large ones because that means netmon will not pick up any config changes to those devices during that interval. So whatever you set it to is up to you. I doubt you will save very much by turning off the config poll unless you have thousands of those devices.
James
_________________________________
James Shanks
Tivoli Network Availability Management
Network Availability Management -- Level 3
Tivoli Software, IBM Corp
1-919-224-1642 | T/L 687-1642 | ITN 26871642
 "Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>
"Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>
Sent by: nv-l-bounces@lists.ca.ibm.com
07/02/2009 12:25 PM
Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com> |
|
|
Sorry James,
we want to stop (or nearly stop) configuration polling on our APC UPSs. We don't see any need for this.
Thanks,
Kevin Sperry
IT Analyst, Data Center Monitoring Control
nationalgrid
7437 Henry Clay Blvd. Bldg#3
Liverpool, NY 13088
Phone: (315) 460-2688 Internal: 829-2688
Kevin.Sperry@us.ngrid.com
From: nv-l-bounces@lists.ca.ibm.com [mailto:nv-l-bounces@lists.ca.ibm.com] On Behalf Of James Shanks
Sent: Thursday, July 02, 2009 11:41 AM
To: Tivoli NetView Discussions
Subject: Re: [NV-L] Configuration polling
I hate answering questions like this without knowing what you are trying to do and why. There's always the possibility someone will take my remarks out of context and shoot themselves in the foot.
There is no published limit. You could set it for 365 d(ays) for once a year for example. I'm not sure what netmon would do with a value bigger than that. The real question is why do you want to do this?
James
_________________________________
James Shanks
Tivoli Network Availability Management
Network Availability Management -- Level 3
Tivoli Software, IBM Corp
1-919-224-1642 | T/L 687-1642 | ITN 26871642
 "Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>
"Sperry, Kevin" <Kevin.Sperry@us.ngrid.com>
Sent by: nv-l-bounces@lists.ca.ibm.com
07/02/2009 11:19 AM
Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com> |
|
|
Hello,
We are running NV 7.15 FP1 on AIX and wanted to know what is the maximum amount of time we can set for the configuration poll. I did search online manuals.
Thank you,
Kevin Sperry
IT Analyst, Data Center Monitoring Control
nationalgrid
7437 Henry Clay Blvd. Bldg#3
Liverpool, NY 13088
Phone: (315) 460-2688 Internal: 829-2688
Kevin.Sperry@us.ngrid.com
********************************************************************************
This e-mail and any files transmitted with it, are confidential to National Grid and are intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error, please reply to this message and let the sender know._______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)
********************************************************************************
This e-mail and any files transmitted with it, are confidential to National Grid and are intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error, please reply to this message and let the sender know._______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
| 
