|
Hi Don,
I used 9y and after performing a demand poll or two, I see the
next scheduled configuration check is out to 2018. We have a few APC UPSs
that seem to "fall out" of the APC Smartset so I add them to the SNMP
configuration as individual specific nodes with the correct community
string.
The reason that this is an issue with us is that the UPSs are
configured to send out email alerts for various events and when an
authentication failure occurs, everyone in the group get's blasted with many
emails and usually complains. I do not have admin control of the
UPSs. We have edited the Smartset, changed versions of the UPS firmware
and well we figured we don't need to perform a configuration check so let's stop
it. I don't see any value in the check.
Thanks for listening,
Kevin Sperry
IT Analyst, Data Center Monitoring
Control
nationalgrid
7437
Henry Clay Blvd. Bldg#3
Liverpool, NY 13088
Phone: (315) 460-2688 Internal: 829-2688
Kevin.Sperry@us.ngrid.com
I recall that I used to
advise students to set this to 5y for nodes that were not to be
polled.
I currently have
customer networks that are not to be snmp polled and I use this 5y
setting.
I believe that there is
no way to stop an initial configuration poll each time the netmon daemon is
restarted.
Best
regards,
===
Don
Davis
From:
nv-l-bounces@lists.ca.ibm.com [mailto:nv-l-bounces@lists.ca.ibm.com] On Behalf Of Sperry, Kevin
Sent: Thursday, July 02, 2009 11:19
AM
To: Tivoli NetView
Discussions
Subject: [NV-L]
Configuration polling
Hello,
We
are running NV 7.15 FP1 on AIX and wanted to know what is the maximum amount of
time we can set for the configuration poll. I did search online
manuals.
Thank you,
Kevin Sperry
IT Analyst,
Data Center Monitoring Control
nationalgrid
7437 Henry Clay
Blvd. Bldg#3
Liverpool,
NY 13088
Phone: (315)
460-2688 Internal: 829-2688
Kevin.Sperry@us.ngrid.com
********************************************************************************
This
e-mail and any files transmitted with it, are confidential to National Grid and
are intended solely for the use of the individual or entity to whom they are
addressed. If you have received this e-mail in error, please reply to this
message and let the sender know.
------------------------------------------------------------------------------
Call 1.888.FC DIRECT (1.888.323.4732) or visit us on the web at firstcitizens.com
today to take advantage of our great products and services.
This electronic mail and any files transmitted with it are confidential and are intended solely for the use
of individual or entity to whom they are addressed. If you are not the intended recipient or the person
responsible for delivering the electronic mail to the intended recipient, be advised that if you have received
this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic
mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the
sender by return mail.
--------------------
First Citizens Bank - Helping our customers achieve a lifetime of success.
Visit us on the web at firstcitizens.com - Member FDIC
==============================================================================
07/02/09, 13:56:16
|