Some of the APPN MIBs are not proprietary to IBM, so you will find them
under the mib-2 MIB. We just loaded the APPN MIB from RFC2155, and it is at
.iso.org.did.internet.mgmt.mib-2.snanauMIB.appnMIB, or .1.3.6.1.2.1.34.4
We had lots of problems getting the MIB loaded as SNMPv2, the worst being
that the data collector, snmpCollect, does not support any MIBs you load in
the v2 MIB database. We have a problem open with Tivoli now trying to get
that resolved. I would encourage you to contact Tivoli support also, so
they provide that functionality. We ended up getting MIB files that had
been converted to SNMPv1, and loaded them. Cisco was gracious enough to
convert the MIB files for us; they also have many SNMPv2 MIB files on their
web site that have already been converted to SNMPv1 format.
> -----Original Message-----
> From: Vynita Pretorius [SMTP:vpretor@FAST.CO.ZA]
> Sent: Monday, June 15, 1998 19:41
> To: NV-L@UCSBVM.UCSB.EDU
> Subject: APPN Mibs
>
> -- [ From: Vynita Pretorius * EMC.Ver #2.5.02 ] --
>
> Hi all
>
> I was unable to find a site with APPN mibs on it so eventually somebody
> emailed them to me. APPN,HPR,IPOA,LEC etc
> I copied theses mibs into the snmp_mibs directory and via the Netview GUI
> I loaded the mibs as snmpv2.
> After loading these mibs I went into private, IBM and pointed at a 3745
> device
> I couldonly find one of the mibs for the escon channel all the others I
> could not find or use.
>
> What is supposed to happen ?
> Should I have seen the other mibs and what type of information will it
> give
> me?
>
> Thanks
> Vynita P
|