Greetings;
I have a Dual interfaced RS6000 AIX 4.1.5 system with Netview AIX V5
installed. The routed daemon is running in quiet mode. The interfaces
actually represent two seperate networks that otherwise cannot see each
other. Here is the problem.
Just about every device on the non-primary network (network routes built
by routed, not the default route) connects to one of two subnets. 10
and 10.249.
The 10 segment has connections to hundreds of devices with addresses all
starting with 10.
The 10.249 segment has connections to hundreds of devices with
addresses, for the most part, starting with 10.249
Many of these devices connect to both segments.
We are running devices with several netmasks. 255.255.255.255,
255.255.255.252, 255.255.255.128, and 255.255.0.0
255.255.0.0 seems to conform to the 10.249 addresses.
Because of the sheer number of the devices connected to these subnets,
its making it difficult to construct a usefull map.
Does anyone know of a solution to my problem?
Thanks
Art DeBuigny
debuigny@dallas.net
NationsBank Network Operations
Network Management Systems Support
|