Hi,
Working on installing the Framework tool upon an F50/7025 running
AIX 4.2.1 I have observed the process failing during the "Distributing
Architecture Specific Server Database" stage. The failure seems
to be first ocurring at line 252 of install.cfg ( Post Config script ).
No
"wlookup" attempts seem to be working ( ie. a screen-full of possible
reasons for why it may be failing is produced ). Even "wlookup -a"
bears
no fruit. We have done and seen different things, and it is only fair
in
asking for help to describe these things for you:-
1. Upon initial install encountered a failure and attempted another
2. Upon 2nd attempt the /tmp filesystem filled up and the install
hung ( Note the cleanup approach used in point 33, below,
was not used entirely in this instance )..
3. Process for removing Framework to allow for re-installation:-
cd /
/etc/Tivoli/oserv.rc stop
umount /tmp/tmeCDROM
rm -r /usr/local/Tivoli
rm -r /tmp/.tivoli
rm -r /var/spool/Tivoli
Is this inadequate to prepare the machine for re-installation of the
Framework product.
4. Things tried:-
i. checked name resolution in conformance with install book
- DNS based - seemed OK
ii. changed from simple encryption to none
iii. changed server specification from intra domain
convention to fully denoted on install panel.
iv. tried with/without license key
We previously installed the Framework V3.2 product onto
a 570 AIX 4.2.1 machine with no problems.
Can someone help - this is a very frustrating problem. Thanks,
Simon Long
Nettrack Technical Solutions Pty Ltd
|