Hello.
I have followed the instructions below and I got the exactly the same
problem.
Brian,
How did you solve it ?
--
Mikael Fältman (mifal@wmdata.com)
WM-data Dataservice AB
Network Services
> -----Original Message-----
> From: Brian Hwang [SMTP:bhwang@TW.IBM.COM]
> Sent: Wednesday, September 02, 1998 3:48 AM
> To: NV-L@UCSBVM.ucsb.edu
> Subject: Re: Netview 5.0 and AIX 4.3
>
> I got some problem when install Netview 5.0 on AIX4.3
> 1) I can't find the X11.compat.fnt.oldX and bs1.en_US.pc.loc
> 2) I got error message when install Netview 5.0 as follow:
> ==================================================
> Starting tracing and logging
> Initializing the Tracing and Logging...
> Done.
> Running customize script for fileset OVMIN-LICENSE.
> Making links....
> Running customize script for fileset OVMIN.
> Making links....
> Running customize script for fileset OVWIN.
> ERROR: Customize script for fileset OVWIN exited with code 2.
> SEV_2 ERR_cfgbf_001
> SEV_2 ERR_bcfg_210
> base: Saving log files to /tmp/NVfail.tar
> NetView Installation encountered errors and has not successfully
> completed.
> running nv6000.base.obj.unconfig
> ==== base unconfig Tue Sep 1 20:10:33 TAIST 1998 ====
> Stopping daemons...
> Removing error log messages...
> Deleting added lines in rc.tcpip
> Removing installp features ODM entries...
> 0518-307 odmdelete: 1 objects deleted.
> 0518-307 odmdelete: 0 objects deleted.
> 0518-307 odmdelete: 1 objects deleted.
> ============================================
>
> please help me, thanks!
>
> Brian Hwang
>
>
>
>
> Ken Guettler <Ken.Guettler@MARYVILLE.COM> on 98/09/01 08:55:44 PM
>
> Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> NetView et alia <NV-L@UCSBVM.UCSB.EDU>
>
> To: NV-L@UCSBVM.UCSB.EDU
> cc: (bcc: Brian CL Hwang/Taiwan/IBM)
> Subject: Re: Netview 5.0 and AIX 4.3
>
>
>
>
> Dan,
>
> I will give it a try.
>
> 1) Ensure all of the necessary AIX files are installed for AIX 4.3.
> These files are listed in the NetView release notes and Installation
> manual.
> Most of these file were pre-installed on my new RS/6000 AIX
> 4.3.1 system. The one I had difficulty with was
> bos.loc.pc_compat.En_US.
> As one other contributer noted, this file is on the AIX 4.3.1
> CD
> but is not shown unless to Install under SMIT using the List_All
> option.
>
> 2) Once all of the files are available add the language locale En_US
> through smit (both Cultural and language conventions)
>
> 3) Set your LANG variable to En_US
> LANG-En_US
> export LANG
>
> 4) Install the Tivoli framework ( I used v3.2) This will require you
> to
> get the Framework patch 3.2-TMF-0004 from the Tivoli support web site.
>
> - Follow the directions in the Release notes and manual to
> create the the CDROM and installation directories
> - Mount the CDROM
> - Run the wpreinst.sh command to copy some files to the
> installation directory. The end of this command displays a wserver -c
> <install dir> command
> you need to run next. ( the wserver command will fail with
> the
> message " unable to guess system type. Try setting $INTERP.")
>
> - At this point "Part 1" of the 3.2-TMF-0004 patch will need
> to
> be completed. The patch (and it's scripts) use a different install
> directory than the Framework manual indicates
> (install_bundle
> vs. install_dir) causing problems in running th scripts.
> I found it easier to untar the patch file and manually copy
> the 3 files for part 1 of the patch. (this is described in the readme
> file.)
>
> - Run the ./wserver -c <install_dir> command as shown at the
> end
> of the wpreinst.sh command again
> - The Tivoli desktop is supposed to appear at this point. I
> had
> to run the . /etc/Tivoli/setup_env.sh command and they type tivoli at
> the command
> line to bring it up.
>
> - Complete the 3.2-TMF-0004 patch installation as described in
> "Part 2" of the patch readme file. (this worked just fine)
>
> 5) You can now resume the NetView installation by installing the
> "NetView Framework Patch" as described in the NetView Installation
> manual
> 6) In my case this was a new NetView installation so I followed the
> manual and went to page 2-17 for installing the NetView Server,
> however
> you
> must also perform the steps on page 2-16 to "Make the Server a
> Managed Resource".
>
> 7) Now you can install NetView as described on pages 2-17 to 2-23 in
> the
> NetView Installation and Configuration manual.
>
>
>
> Ken
>
> Maryville Data Systems
> One Pierce Place Suite 475W
> Itasca, IL 60143
> (630) 285-9597 ext. 5105
>
>
> > -----Original Message-----
> > From: Dan Cox [SMTP:dcox@LEXMARK.COM]
> > Sent: Monday, August 31, 1998 12:07 PM
> > To: NV-L@UCSBVM.ucsb.edu
> > Subject: Netview 5.0 and AIX 4.3
> >
> > So could someone sum up what is needed to run netview 5.0 on aix 4.3
> > or 4.3.1
> >
> >
|