nv-l
[Top] [All Lists]

FW: Netmon traps

To: nv-l@lists.tivoli.com
Subject: FW: Netmon traps
From: BANDIERAMONTE Miguel TECSIS <TCSBTE@TECSIS.COM>
Date: Wed, 7 Oct 1998 11:15:12 -0300
Reply-to: Discussion of IBM NetView and POLYCENTER Manager on NetView et alia <NV-L@UCSBVM.UCSB.EDU>
Sender: Discussion of IBM NetView and POLYCENTER Manager on NetView et alia <NV-L@UCSBVM.UCSB.EDU>
I´m having the same problem when I restart the Netview or when I make
any change in the SNMP configuration, after that I don´t receive traps
from netmon and if make a demand pool it doesn´t show me anything for a
long time (15 minutes or more). I´ve check the trafic in the interfase
and it´s very low. The usage of memory and CPU is low also. Supposing
that 5.1 could solve the problem I migrate from 5.0 to 5.1 but the
problem persist. 
I´m using Netview exclusivelly in an AIX workstation 7043 mod 140 with
512 Mb Ram. The amount of object in the databese is 4000. Is there any
way to put netmon working faster?

Regards.

Ing. Miguel Bandieramonte
TECSIS ACE Siderca Siderar
sidbte@tecsis.com
54-489-3-3979


> -----Original Message-----
> From: PUB:James_Shanks@TIVOLI.COM [SMTP:James_Shanks@TIVOLI.COM]
> Sent: Wednesday, October 07, 1998 9:53 AM
> To:   NV-L@UCSBVM.ucsb.edu
> Subject:      Re: Netmon traps
> 
> netmon initialization involves loading your ENTIRE topology database
> into
> memory and doing a config check before any status polling is done.
> 
> James Shanks
> Tivoli (NetView for UNIX) L3 Support
> 
> 
> 
> "Rama, R. (Reggie)" <ReggieR@NEDCOR.CO.ZA> on 10/07/98 03:40:59 AM
> 
> Please respond to Discussion of IBM NetView and POLYCENTER Manager on
>       NetView et alia <NV-L@UCSBVM.UCSB.EDU>
> 
> To:   NV-L@UCSBVM.UCSB.EDU
> cc:    (bcc: James Shanks)
> Subject:  Netmon traps
> 
> 
> 
> 
> 
> Hello
> 
> I would like to query something. I am using NV5.0 &  AIX 4.2.
> 
> When I stop all my NV daemons & thereafter restart them, it takes an
> extremely long time before I start to receive traps from netmon. Also,
> if I
> demandpoll any node, this also does not work.
> 
> Why is this. Have I not configured something properly or is netmon
> extremely
> busy polling nodes. How can I find out what is netmon doing after I
> have
> restarted all my daemons. Also, I have checked my trapd.log and there
> are
> no
> netmon trapd therein as well.
> 
> Thanks in advance for all the assistance.
> 
> Regards
> Reggie Rama
> Nedcor IT, S.A

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web