No. Please see may earlier reply on this. Until netmon has everything back
under control he will not honor your demand poll request nor do any status
polling. He needs to load topology, check the seed file, and figure out
what needs to have its config poll updated before he resumes normal steady
state operations, which includes doing demand poll requests and status
polling. The bigger your network, the longer this init process will take.
I know that development is looking at ways to improve the init process but
it is not likely you will see anything between new releases.
James Shanks
Tivoli (NetView for UNIX) L3 Support
BANDIERAMONTE Miguel TECSIS <TCSBTE@TECSIS.COM> on 10/07/98 10:15:12 AM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView et alia <NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc: (bcc: James Shanks)
Subject: FW: Netmon traps
I
´m having the same problem when I restart the Netview or when I make
any change in the SNMP configuration, after that I don´t receive traps
from netmon and if make a demand pool it doesn´t show me anything for a
long time (15 minutes or more). I´ve check the trafic in the interfase
and it´s very low. The usage of memory and CPU is low also. Supposing
that 5.1 could solve the problem I migrate from 5.0 to 5.1 but the
problem persist.
I´m using Netview exclusivelly in an AIX workstation 7043 mod 140 with
512 Mb Ram. The amount of object in the databese is 4000. Is there any
way to put netmon working faster?
Regards.
Ing. Miguel Bandieramonte
TECSIS ACE Siderca Siderar
sidbte@tecsis.com
54-489-3-3979
> -----Original Message-----
> From: PUB:James_Shanks@TIVOLI.COM [SMTP:James_Shanks@TIVOLI.COM]
> Sent: Wednesday, October 07, 1998 9:53 AM
> To: NV-L@UCSBVM.ucsb.edu
> Subject: Re: Netmon traps
>
> netmon initialization involves loading your ENTIRE topology database
> into
> memory and doing a config check before any status polling is done.
>
> James Shanks
> Tivoli (NetView for UNIX) L3 Support
>
>
>
> "Rama, R. (Reggie)" <ReggieR@NEDCOR.CO.ZA> on 10/07/98 03:40:59 AM
>
> Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> NetView et alia <NV-L@UCSBVM.UCSB.EDU>
>
> To: NV-L@UCSBVM.UCSB.EDU
> cc: (bcc: James Shanks)
> Subject: Netmon traps
>
>
>
>
>
> Hello
>
> I would like to query something. I am using NV5.0 & AIX 4.2.
>
> When I stop all my NV daemons & thereafter restart them, it takes an
> extremely long time before I start to receive traps from netmon. Also,
> if I
> demandpoll any node, this also does not work.
>
> Why is this. Have I not configured something properly or is netmon
> extremely
> busy polling nodes. How can I find out what is netmon doing after I
> have
> restarted all my daemons. Also, I have checked my trapd.log and there
> are
> no
> netmon trapd therein as well.
>
> Thanks in advance for all the assistance.
>
> Regards
> Reggie Rama
> Nedcor IT, S.A
|