Hi, Wiggo;
As far as I know Framework 3.2 does not support Solaris 2.6 neither for
TMR server nor for managed node. This does not mean that it will not
work at all. You can however encounter problems as you really did. Maybe
someone is running Framework 3.2 on Solaris 2.6?
Framework 3.6 does support Solaris 2.6 so there should not be
installation problems as you have seen.
Best regards,
Vladimir.
> -----Original Message-----
> From: Wiggo Moller [SMTP:wmoller@SDATA.NO]
> Sent: Wednesday, October 21, 1998 2:17 PM
> To: NV-L@UCSBVM.UCSB.EDU
> Subject: Re: Problems with Netview5.1 and Solaris2.6
>
> Hi,
>
> First of all..thank you for your answer.
> I am still not able to sucessfully install Netview5.1 on framemaker3.2
> and
> Solaris 2.6.
> the NV* files gives this error message
>
> ERROR: Customize script for fileset IBMVA-RUN exited with code 2.
> SEV_2 ERR_cfgbf_001
> SEV_2 ERR_bcfg_210
> base: Saving log files to /tmp/NVfail.tar
> funct_return=1
> + [ 1 = 0 ]
> + echo NetView Installation encountered errors and has not
> successfully
> completed.
>
> The strange thing is that I installed framemaker 3.6 and NV on solaris
> 2.6..and its installation was a sucess. So I guess the Answer book
> theory
> fails. I also took a netstat -a on the machine that the installation
> was
> unsuccessfull on..nothing running on port 8888 there.
>
>
>
> --
> Cheers
>
> Wiggo Moeller
> ___ ___
> / /\\ |
> / / / |
> / / // /\|
> /__/ // / \
> \__\// // / wmoller@sdata.no
> \--\ / / Skrivervik Data AS +47 22 18 58 00
> (switchboard)
> \ \ / Postboks 3885 Ullevaal Hageby +47 22 18 59 87
> (direct)
> \__\/ 0805 OSLO
> Norway
>
> On Tue, 20 Oct 1998 Jason_Kravitz@TIVOLI.COM wrote:
>
> > Wiggo -
> > The first thing to do is check the NVS* files in your tmp directory
> >
> > such as /tmp/NVS_51_NVFCONF_after.error as these will give you more
> >
> > detailed information on why the install failed.
> >
> >
> > I am not 100% sure but it looks like your install failed because you
> have a
> > port in use
> > This happens often on Solaris 2.6 because the new Answer Book on 2.6
> uses
> > port
> > 8888 by default (which is needed by NetView)
> >
> > If this is your problem, you can reassign the Answer Book port by
> doing the
> > following:
> > cd /usr/lib/ab2/bin
> > run ab2admin
> >
> > Turn off Administrator Access Control
> >
> > Assign new/different port (8899 will work)
> >
> > Recycle the Answer Book server
> >
> > Reboot the computer
> >
> >
> >
> > As far as cleaning up a botched install, the following should allow
> you to
> > reinstall
> >
> > run Tivoli environment setup script (setup_env.sh)
> >
> > rm -rf $BINDIR/.installed/NV*
> >
> > rm -rf $DBDIR/.installed/NV*
> >
> > rm -rf /usr/OV
> >
> > Jason
> >
> >
> >
> > Jason Kravitz - NetView Verification - jkravitz@tivoli.com
> >
> >
> >
> >
> >
> >
> > Wiggo Moller <wmoller@SDATA.NO> on 10/20/98 07:58:41 AM
> >
> > Please respond to Discussion of IBM NetView and POLYCENTER Manager
> on
> > NetView <NV-L@UCSBVM.UCSB.EDU>
> >
> > To: NV-L@UCSBVM.UCSB.EDU
> > cc: (bcc: Jason Kravitz/Tivoli Systems)
> > Subject: Problems with Netview5.1 and Solaris2.6
> >
> >
> >
> >
> >
> > Note: Some recipients have been dropped due to syntax errors.
> > Please refer to the "$AdditionalHeaders" item for the complete
> headers.
> >
> >
> >
> > Hi,
> >
> > I am running TME3.2, I have installed the TME10 Netview framwork
> patch and
> > 3.2-TMF-0003
> >
> > I have problem installing, here is the error message I get.
> >
> >
> > Distributing architecture specific NetView Features Configuration
> for tuva
> > .......................................................
> > Something went wrong:
> > Media Packet: "/cdrom/volume_name/FILE14.PKT"
> > tuva:FAILED (soft error)
> >
> > Failure: the last few lines of the error log
> > (/tmp/NVS_51_NVFCONF_after.error):
> > ==== base unconfig Tue Oct 20 13:33:59 MET DST 1998 ====
> > 'WARNING: The following clients are running:
> > "
> > ''Stopping daemons...
> > '"Removing error log messages...
> > ""Deleting added lines in rc.tcpip
> > ""Removing installp features ODM entries...
> > ""Base operation complete...
> > "+ exit 1
> > completed with errors.
> >
> > Registering product installation attributes...registered.
> >
> > Finished product installation.
> >
> > ps..could someone send me the complete uninstall procedure ??
> >
> > --
> > Cheers
> >
> > Wiggo Moeller
> > ___ ___
> > / /\\ |
> > / / / |
> > / / // /\|
> > /__/ // / \
> > \__\// // / wmoller@sdata.no
> > \--\ / / Skrivervik Data AS +47 22 18 58 00
> > (switchboard)
> > \ \ / Postboks 3885 Ullevaal Hageby +47 22 18 59 87
> (direct)
> > \__\/ 0805 OSLO
> > Norway
> >
|