nv-l
[Top] [All Lists]

Re: How do I stop nodes from being processed by event manager?

To: nv-l@lists.tivoli.com
Subject: Re: How do I stop nodes from being processed by event manager?
From: Don Davis <don-n-darla@WORLDNET.ATT.NET>
Date: Fri, 13 Nov 1998 07:50:00 -0500
Organization: APC, Inc
Reply-to: don-n-darla@worldnet.att.net
Sender: Discussion of IBM NetView and POLYCENTER Manager on NetView <NV-L@UCSBVM.UCSB.EDU>
J.P.
Unmanaging a node only stops netmon's polling of the node. (pinging,
configuration and discovery polling)
Unmanaging does not stop reception of "unsolicited traps" that are sent
by the (unmanaged) node.
The only way to accomplish this is to write a ruleset that checks the
node status before processing the trap, If it is unmanaged, discard it.
Be careful though, you do not want to scan the database every time a
trap is received.
I would suggest using a collection to define those "unmanaged" nodes,
then check for collection membership before performing a database scan.

The other (better) option is to go to each node and remove NetView from
its Trap Destination configuration.

=================================================
Don Davis - Consultant, Instructor
Alliance of Professionals & Consultants, Inc.
8600 Caswell Court
Raleigh, NC 27613-1100 USA    Phone: 919-847-6056
Email: Don@apc-services.com
Visit our web site at http://www.apc-services.com
=================================================

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web