Jens,
Did you try adding the device manually or using loadhosts? Howabout
ovtopofix?
At 07:42 PM 11/17/98 +0000, you wrote:
>
>Hi all,
>
>I'am near to despair.
>I'am trying to help netmon to discover a node and display it in the map since
>any hours. I've done all procedures listed in the Diagnosis Guide without any
>success.
>The object is not in the IP Topology Database and not on any other map.
>I can ping the node using the Hostname or the IP address, all connectivity
>tests of NetView are OK (ICMP/TCP/SNMP).
>Also I can traceroute and telnet from the command line to the node.
>An snmpinfo or snmpwalk gives me the correct informations of this node, very
>fine.
>The IP address is listed in the seedfile and there is no range defined, which
>excluding some IP addresses.
>Also I can used the MIB browser to read out the MIB tables of this node.
>It's all OK up to this point and the netmon daemon is correct configured and
>also restarted.
>But if I'd like to send an Test --> Demand Poll, I get the response "Node
' IP
>address....' not found".
>This is the only error message. But SNMP connectivity is OK, snmpget from the
>command line and the MIB browser works very fine and
>D E M A N D P O L L doesn't works. And I believe, that this the reason, why
>the node cannot discovered. But what can be the reason, that this DEMAND POLL
>doesn't works.
>If there are any useful hints, I'd like to be very happy.
>Thanks so much in advance !!!!
>
>
>
>MfG / Best Regards
>Jens Hahn
>_______________________________________________________
>
>Jens Hahn Phone:
>+49-6131-842661
>Tivoli NetView 2nd Level Support Mobile: 0177-2479835
>NWM Design & Infrastructure Fax: +49-6131-846809
>IBM Global Services (Network Services) hahnj@de.ibm.com
>GERMANY Kst 4374,
>D-55131 Mainz
>
>
|