Hello James/Jeffery,
I can confirm this , i downloaded this script from the cisco site.
It is attached to this mail.
Oren.
-----Original Message-----
From: James Shanks <James_Shanks@TIVOLI.COM>
To: NV-L@UCSBVM.ucsb.edu <NV-L@UCSBVM.ucsb.edu>
Date: iem yliyi 05 ipe`x 1999 19:48
Subject: Re: Cisco Traps: Trap found with no known format in trapd.conf
>My understanding is that you can get a large addtrap script from Cisco
>support which will add all their traps to trapd.conf. I thought you could
>just download it from their website, but perhaps my information is old.
>Can anyone confirm this?
>
>Failing that you could try running mib2trap against the MIBs you have and
>see if it will create small addtraps scripts for you. You would then run
>these to update trapd.conf. I am assuming you have NetView V5.1.
>
>James Shanks
>Tivoli (NetView for UNIX) L3 Support
>
>
>
>Jeff Singer <JSinger@METRICOM.COM> on 01/05/99 01:46:31 PM
>
>Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> NetView <NV-L@UCSBVM.UCSB.EDU>
>
>To: NV-L@UCSBVM.UCSB.EDU
>cc: (bcc: James Shanks)
>Subject: Cisco Traps: Trap found with no known format in trapd.conf
>
>
>
>
>
>I am getting a large number of traps from cisco routers that are not
>defined
>in trapd.conf. I have loaded a large number of the cisco snmpv1 mibs from
>their website. Do the mibs contain the trap information as well ? Where
>can I get the information to load into trapd.conf. I am getting a variety
>of traps, not just one trap over and over. Here is one of the traps I get
>repeatedly:
>
>Specific:1
>Generic: 6
>Category: Status Events
>Enterprise: 1.3.6.1.4.1.9
>Source: Source Not Known
>Hostname: ciscorouter
>
>
>*************************************************************
>* Jeffrey H. Singer Phone: 408-399-8257 *
>* Network Engineer Email: jeff.singer@metricom.com *
>* Metricom, Inc. Web: http://www.metricom.com *
>*************************************************************
traps.script
Description: Binary data
traps1.txt
Description: Text document
|